សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Drawknife Forged from Tool Steel, with Two Handles
Forge

បង្កើតដោយ

Forge

14. តុលា 2026NO
24
0
0
0
0

Drawknife Forged from Tool Steel, with Two Handles

A drawknife is a long blade with a handle at each end, pulled toward you to shave wood, usually with the work held in a shaving horse. Forge a blade much longer than it is deep, draw a tang at each end and bend both forward, grind one bevel of about 25°, harden and temper, and fit two wooden handles. The picture: a drawknife in use on a shaving horse.
មធ្យម
A day

ការណែនាំ

1

Forge the blade and tangs

Draw tool-steel bar out to a flat blade about 25 cm long and 3–4 cm deep (our size; Wikipedia's example is 23 cm). Draw a tang at each end and bend both at right angles to the same side.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដែករបារឧបករណ៍រាបស្មើដែករបារឧបករណ៍រាបស្មើ1 ដុំ
ធ្យូងធ្យូង2 as required

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ទាំងជល់ (កំណាត់ដែក)ទាំងជល់ (កំណាត់ដែក)
ញញួរស្នាមឆ្លងញញួរស្នាមឆ្លង
ដង្កៀបជាងដែកដង្កៀបជាងដែក
ស្រោមដៃផ្សារស្រោមដៃផ្សារ
វ៉ែនតាសុវត្ថិភាពវ៉ែនតាសុវត្ថិភាព
2

File the bevel

Anneal in the ashes, hold it in the vise and file one bevel along the edge, about 25°, leaving it a little thick for hardening.

ឧបករណ៍ដែលត្រូវការ៖

ដង្កាប់តុធ្ងន់ដង្កាប់តុធ្ងន់
ដែកឆាបលោហៈដែកឆាបលោហៈ
3

Harden and temper

Heat the whole edge evenly to cherry red and quench in water. Polish bright, warm the back and quench when the edge shows dark straw.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ទឹកទឹក10 លីត្រ

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ធុងជ្រលក់ត្រជាក់ធុងជ្រលក់ត្រជាក់
ដង្កៀបជាងដែកដង្កៀបជាងដែក
ស្រោមដៃផ្សារស្រោមដៃផ្សារ
វ៉ែនតាសុវត្ថិភាពវ៉ែនតាសុវត្ថិភាព
4

Handles

Saw and shape two hardwood handles, drill each through for a tang, push them on and peen the tang ends over. Oil the handles.

សម្ភារៈសម្រាប់ជំហាននេះ៖

បន្ទះឈើរឹងតូចវែងបន្ទះឈើរឹងតូចវែង2 ដុំ
ប្រេងលីនស៊ីតប្រេងលីនស៊ីត0.02 លីត្រ

ឧបករណ៍ដែលត្រូវការ៖

រណារដៃរណារដៃ
ស្វានដៃស្វានដៃ
ដែកឆាបលោហៈដែកឆាបលោហៈ
ញញួរស្នាមឆ្លងញញួរស្នាមឆ្លង
ទាំងជល់ (កំណាត់ដែក)ទាំងជល់ (កំណាត់ដែក)
5

Sharpen

Hone the bevel on the stone, then flatten the back and take off the burr.

ឧបករណ៍ដែលត្រូវការ៖

ថ្មសម្លៀងគ្រើម ១០០០ថ្មសម្លៀងគ្រើម ១០០០
6

Bevel width for 25°

កំពុងផ្ទុកសៀវភៅ Jupyter…

សម្ភារៈ

5

ឧបករណ៍ចាំបាច់

12

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...