កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Steeled Picks: Common Pick, Pickaxe and Miner's Pick, Iron Eye with Steel Points Welded In (Edwinson, 1886)
Forge

បង្កើតដោយ

Forge

14. វិច្ឆិកា 2026NO
7
0
0
0
0

Steeled Picks: Common Pick, Pickaxe and Miner's Pick, Iron Eye with Steel Points Welded In (Edwinson, 1886)

How a village smith made picks in the 1880s, from George Edwinson's smithing series in Amateur Work: an iron head welded round its eye, the ends split hot and steel wedges welded in, then hardened and tempered. Variants: the common pick, the pickaxe with a steel-laid axe blade, and the miner's pick with a steel-faced hammer end.
កម្រិតខ្ពស់
A day at the forge

ការណែនាំ

1

Read Edwinson

"The eye or hole for the shaft is formed by first shaping the two sides ... and then welding the two parts together."
2

Form the eye

Forge the two halves of the head with a hollow for the eye in each (his fig. 216), lay them together and weld them into one head round the eye (fig. 217).

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដំបងដែកវាយដំបងដែកវាយ1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ទាំងជល់ (កំណាត់ដែក)ទាំងជល់ (កំណាត់ដែក)
ញញួរញញួរ
ដង្កៀបជាងដែកដង្កៀបជាងដែក
ដែកស្រួចពង្រីករន្ធដែកស្រួចពង្រីករន្ធ
3

Draw the ends

Forge the two ends down to the size you need: a pointed bill and a chisel bill for the common pick, an axe and a point for the pickaxe, a point and a hammer for the miner's pick. For the miner's pick leave the eye massive and oval, tapering from both sides as in a hammer.

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ទាំងជល់ (កំណាត់ដែក)ទាំងជល់ (កំណាត់ដែក)
ញញួរញញួរ
ញញួរធំញញួរធំ
4

Steel the points

Split each bill end with a hot chisel (his hot sett, fig. 218), insert a wedge of steel in the cleft and weld it in under borax, then draw it out to shape. Do not heat cast steel above a cherry red.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដែកថែបរំលាយក្នុងឆ្នាំងដែកថែបរំលាយក្នុងឆ្នាំង1 ដុំ
ម្សៅបូរ៉ាក់ម្សៅបូរ៉ាក់1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ដែកកាត់ក្ដៅដែកកាត់ក្ដៅ
ញញួរធំញញួរធំ
ទាំងជល់ (កំណាត់ដែក)ទាំងជល់ (កំណាត់ដែក)
ដង្កៀបជាងដែកដង្កៀបជាងដែក
5

Steel the axe or hammer end

Pickaxe: enclose a slice of shear steel between the folding leaves of iron at the axe end and forge them down together to form the axe. Miner's pick: face the hammer end with steel.

សម្ភារៈសម្រាប់ជំហាននេះ៖

បន្ទះដែកថែបស៊ែ (shear steel)បន្ទះដែកថែបស៊ែ (shear steel)1 ដុំ
ម្សៅបូរ៉ាក់ម្សៅបូរ៉ាក់1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ទាំងជល់ (កំណាត់ដែក)ទាំងជល់ (កំណាត់ដែក)
ញញួរញញួរ
ដង្កៀបជាងដែកដង្កៀបជាងដែក
6

Harden and temper

Harden the points and temper them to a brown tint tending to straw at the very point. Temper the pickaxe blade purple where steel meets iron, running to straw at the edge.

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ធុងជ្រលក់ត្រជាក់ធុងជ្រលក់ត្រជាក់
7

Handle it (ours)

He does not cover the handle. Ours: shape an ash handle to the eye, drive it in and wedge it.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដុំឈើអាសដុំឈើអាស1 ដុំ
ស្នូលឈើស្នូលឈើ1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

កាំបិតទាញពីរដងកាំបិតទាញពីរដង
ញញួរញញួរ
8

Troubleshooting

Pick troubleshooting.

Flow

Loading...
9

History and honest limits

From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond). He gives no dimensions or weights; the sizes, the handle and the tools listed are ours.

សម្ភារៈ

6

ឧបករណ៍ចាំបាច់

9

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...