សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Ferrite Toroid Core: Copper-Zinc Ferrite Fired at 1050 °C, Held at 600 °C in Oxygen (Snoek)
Charlie

បង្កើតដោយ

Charlie

21. តុលា 2026DE
15
0
0
0
0

Ferrite Toroid Core: Copper-Zinc Ferrite Fired at 1050 °C, Held at 600 °C in Oxygen (Snoek)

Ferrite is a ceramic magnet: iron oxide combined with other metal oxides, carrying magnetic flux while hardly conducting electricity. Snoek at Philips (US 2,452,531, 1948) made this copper-zinc ferrite ring at a lower heat: technical copper oxide, zinc oxide and iron oxide with 1 % brownstone, fired at 1050 °C, then held 14 hours at 600 °C, all in oxygen. His ring had an initial permeability of 385. The picture: our diagram.
កម្រិតខ្ពស់
2 days

ការណែនាំ

1

Mix 20.7 : 31.6 : 47.7 mol + 1 % brownstone

Mix technical copper oxide, zinc oxide and iron oxide in the molecular ratio 20.7 : 31.6 : 47.7 (on the pure oxides) and add 1 % by weight of brownstone (manganese dioxide). Ours, by weight: 13.91 g copper oxide, 21.73 g zinc oxide and 64.36 g ferric oxide per 100 g, plus 1 g brownstone.

សម្ភារៈសម្រាប់ជំហាននេះ៖

អុកស៊ីតស្ពាន់អុកស៊ីតស្ពាន់13.91 ក្រ
ម្សៅស័ង្កសីអុកស៊ីតម្សៅស័ង្កសីអុកស៊ីត21.73 ក្រ
អុកស៊ីដហ្វែរិកអុកស៊ីដហ្វែរិក64.36 ក្រ
ម៉ង់ហ្គាណែសឌីអុកស៊ីត (ពីរ៉ូលូស៊ីត)ម៉ង់ហ្គាណែសឌីអុកស៊ីត (ពីរ៉ូលូស៊ីត)1 ក្រ

ឧបករណ៍ដែលត្រូវការ៖

ជញ្ជីងចានពីរជញ្ជីងចានពីរ
ម៉ាស់ការពារធូលីម៉ាស់ការពារធូលី
2

Grind for 3 hours in an iron ball mill

Grind the mixture for 3 hours in a mill with iron balls.

ឧបករណ៍ដែលត្រូវការ៖

ម៉ាស៊ីនកិនគ្រាប់ដែកម៉ាស៊ីនកិនគ្រាប់ដែក
ម៉ាស់ការពារធូលីម៉ាស់ការពារធូលី
3

Mould a ring at 4 tons per cm²

Mould a ring 3 cm across and 4 × 4 mm in section at 4 tons per square centimetre, with water as the plastifying and binding agent.

ឧបករណ៍ដែលត្រូវការ៖

ម៉ាស៊ីនសង្កត់អ៊ីដ្រូលិកម៉ាស៊ីនសង្កត់អ៊ីដ្រូលិក
ផ្ទាំងសង្កត់ចិញ្ចៀនផ្ទាំងសង្កត់ចិញ្ចៀន
ទឹកចម្រោះទឹកចម្រោះ
4

Fire 1 hour at 1050 °C, hold 14 hours at 600 °C

Sinter the ring in oxygen at 1050 °C for 1 hour, cool it slowly to 600 °C and hold it there for 14 hours, all in oxygen, then let it cool further. Snoek's core had an initial permeability of 385.

ឧបករណ៍ដែលត្រូវការ៖

ឡបំពង់ឡបំពង់
អុកស៊ីសែនអុកស៊ីសែន
ធុងឧស្ម័នសម្ពាធធុងឧស្ម័នសម្ពាធ
ពីរ៉ូម៉ែត្រពីរ៉ូម៉ែត្រ
ដង្កាប់ឆ្នាំងរំលាយដង្កាប់ឆ្នាំងរំលាយ
ស្រោមដៃធន់កម្តៅស្រោមដៃធន់កម្តៅ

សម្ភារៈ

4

ឧបករណ៍ចាំបាច់

12

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...