កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Plough Coupling Strap: Cross-Strap With Buckled Billets for a Pair of Horses (Hasluck, Harness Making, 1904)
Tex

បង្កើតដោយ

Tex

13. វិច្ឆិកា 2026FO
9
0
0
0
0

Plough Coupling Strap: Cross-Strap With Buckled Billets for a Pair of Horses (Hasluck, Harness Making, 1904)

When two horses plough side by side, a coupling strap ties them together so they keep level. This is the coupling from Paul N. Hasluck's Harness Making (1904): a 1 in strap 28 in to 30 in long with a buckled billet at each end, buckled from the mouth of one horse to the other. Every size is his; the picture is our diagram.
ចាប់ផ្តើម
About 2 hours

ការណែនាំ

1

His sizes in centimetres

កំពុងផ្ទុកសៀវភៅ Jupyter…
2

Read Harness Making, ch. IX

"Couplings are also a necessary part of plough gear. In some localities only cross-straps are employed from mouth to mouth when ploughing in pairs."
3

Cut the strap

Cut the strap 1 in wide and 28 in to 30 in long. Turn it in about 1 in at each end, make a hole for the buckle, and shave the points.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ស្បែកគ្រឿងសេះស្បែកគ្រឿងសេះ1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

កាំបិតកាត់ស្បែកកាំបិតកាត់ស្បែក
ឧបករណ៍ចោះស្បែកឧបករណ៍ចោះស្បែក
ខ្សែវាស់ខ្សែវាស់
4

Make the billets

Cut two billets the same width, 1 ft long; trim them to a point at one end and shave the other. Edge them and crease them (the book prints "edge back, and crease them", probably for "edge, black").

សម្ភារៈសម្រាប់ជំហាននេះ៖

ស្បែកគ្រឿងសេះស្បែកគ្រឿងសេះ1 ដុំ
ជាតិពណ៌ស្បែកជាតិពណ៌ស្បែក1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

កាំបិតកាត់ស្បែកកាំបិតកាត់ស្បែក
ឧបករណ៍កាត់ជ្រុងគែមឧបករណ៍កាត់ជ្រុងគែម
ឧបករណ៍ចុចបត់ឧបករណ៍ចុចបត់
ចង្កៀងភ្លើងប្រូផានចង្កៀងភ្លើងប្រូផាន
5

Put it together

Put the buckle in, then the thin end of the billet 2 in down at the back of the buckle. Put a loop between the chape by the buckle, and stitch one billet and buckle at each end. Punch two holes in each billet.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្បាលខ្សែក្រវាត់ដែកមានអណ្ដាតក្បាលខ្សែក្រវាត់ដែកមានអណ្ដាត2 ដុំ
ស្បែកគ្រឿងសេះស្បែកគ្រឿងសេះ1 ដុំ
អំបោះស្បែកអំបោះស្បែក1 ដុំ
ក្រមួនឃ្មុំក្រមួនឃ្មុំ1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ដំបងធ្វើរង្វិលដំបងធ្វើរង្វិល
ដែកចោះដែកចោះ
ម្ជុលដេរកែបពីរម្ជុលដេរកែបពីរ
ដង្កៀបឈើសម្រាប់ដេរស្បែកដង្កៀបឈើសម្រាប់ដេរស្បែក
ឧបករណ៍ចោះស្បែកឧបករណ៍ចោះស្បែក
6

Crossing couplings for a pair

Sometimes two coupling straps are used for a pair, crossing each other from the hames of each horse to the mouth of the other. Make them the same way but longer: 38 in, each with 12 in billets. Some are made a foot longer and cut in two, one end 15 in long with a buckle and loop and the other made to buckle on, with many holes. Then the coupling can be shortened on a young horse's side, to keep it back until it has learned the ordinary working pace.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ស្បែកគ្រឿងសេះស្បែកគ្រឿងសេះ1 ដុំ
ក្បាលខ្សែក្រវាត់ដែកមានអណ្ដាតក្បាលខ្សែក្រវាត់ដែកមានអណ្ដាត4 ដុំ
អំបោះស្បែកអំបោះស្បែក1 ដុំ
ក្រមួនឃ្មុំក្រមួនឃ្មុំ1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

កាំបិតកាត់ស្បែកកាំបិតកាត់ស្បែក
ដំបងធ្វើរង្វិលដំបងធ្វើរង្វិល
ដែកចោះដែកចោះ
ម្ជុលដេរកែបពីរម្ជុលដេរកែបពីរ
ឧបករណ៍ចោះស្បែកឧបករណ៍ចោះស្បែក
ខ្សែវាស់ខ្សែវាស់
7

Troubleshooting

Coupling strap troubleshooting.

Flow

Loading...
8

History and honest limits

From **Harness Making**, edited by Paul N. Hasluck, Cassell, 1904 (Project Gutenberg 70169), chapter IX, "Plough Harness", couplings, pp. 110-111; every figure was checked on the archive.org scan (harnessmaking00hasl). He gives no buckle size; a 1 in buckle suits the 1 in strap. The picture is our diagram from his text. The tools and metric figures are ours.

សម្ភារៈ

5

ឧបករណ៍ចាំបាច់

10

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...