កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Snaffle Riding Bridle: Cheeks, Slit Head Strap, Front, Throat Lash and Reins (Hasluck, Saddlery, 1904)
Tex

បង្កើតដោយ

Tex

13. វិច្ឆិកា 2026FO
4
0
0
0
0

Snaffle Riding Bridle: Cheeks, Slit Head Strap, Front, Throat Lash and Reins (Hasluck, Saddlery, 1904)

The plain riding bridle, "a single head and rein bridle", from Paul N. Hasluck's Saddlery (1904): two cheeks buckled to a snaffle bit, a head strap slit at each end into cheek and throat-lash straps, a front (browband), a throat lash and a pair of buckled reins. Every size is his; the bit is bought. It is the riding counterpart of the cart bridle.
មធ្យម
About 1 day

ការណែនាំ

1

Cutting list

កំពុងផ្ទុកសៀវភៅ Jupyter…
2

Read Saddlery, ch. VI

"All the stitching must be done from behind, so that the best face of the stitches will be next the horse when the bridle is on."
3

Make the cheeks

Cut two cheeks about 7/8 in wide and 9 in long. Each has a buckle at each end: one on a chape turned down, the other on the flat end of the strap without turning, with the billet underneath. Leave room for a loop before the buckle and the point of the cheek, and set the billet far enough behind the buckle for two loops; put a runner loop on the cheek and stitch another in with the chape. Cut the billets 9 in long. Stitch them in single-handed and back-stitch with linen thread, all from behind. Make one hole in each billet.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ស្បែកគ្រឿងសេះស្បែកគ្រឿងសេះ1 ដុំ
ក្បាលខ្សែក្រវាត់លង្ហិនមានអណ្ដាតក្បាលខ្សែក្រវាត់លង្ហិនមានអណ្ដាត4 ដុំ
អំបោះលីនិនអំបោះលីនិន1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

កាំបិតកាត់ស្បែកកាំបិតកាត់ស្បែក
ឧបករណ៍កាត់ជ្រុងគែមឧបករណ៍កាត់ជ្រុងគែម
ឧបករណ៍ចុចបត់ឧបករណ៍ចុចបត់
ដែកចោះរន្ធដេរស្បែកដែកចោះរន្ធដេរស្បែក
ដែកចោះដែកចោះ
ម្ជុលដេរកែបពីរម្ជុលដេរកែបពីរ
ដង្កៀបឈើសម្រាប់ដេរស្បែកដង្កៀបឈើសម្រាប់ដេរស្បែក
ដំបងធ្វើរង្វិលដំបងធ្វើរង្វិល
ឧបករណ៍ចោះស្បែកឧបករណ៍ចោះស្បែក
4

Make the head strap

Cut the head strap 1-1/8 in by 1 ft 10 in and slit it 5 in at each end. For a 3/4 in cheek, slit 3/4 in on one side and 3/8 in for a 3/8 in throat lash, with the wide slits on the same side at both ends. Punch four holes in each wide slit and six, closer together, in each narrow one.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ស្បែកគ្រឿងសេះស្បែកគ្រឿងសេះ1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

កាំបិតកាត់ស្បែកកាំបិតកាត់ស្បែក
ឧបករណ៍ចោះស្បែកឧបករណ៍ចោះស្បែក
ខ្សែវាស់ខ្សែវាស់
5

Make the front

Cut the front 3/4 in by 1 ft 2-1/4 in from the end of one bend to the other, after bending. Turn it over the head strap and mark a line across close to it, so there is 1 ft 1 in between the cross lines. Stitch the ends down, with a row along each side.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ស្បែកគ្រឿងសេះស្បែកគ្រឿងសេះ1 ដុំ
អំបោះលីនិនអំបោះលីនិន1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

កាំបិតកាត់ស្បែកកាំបិតកាត់ស្បែក
ដែកចោះរន្ធដេរស្បែកដែកចោះរន្ធដេរស្បែក
ដែកចោះដែកចោះ
ម្ជុលដេរកែបពីរម្ជុលដេរកែបពីរ
6

Make the throat lash

Make the throat lash 3/8 in by 1 ft 7 in after turning down for the buckles. Put two runner loops on it besides the loops at the buckles of each end.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ស្បែកគ្រឿងសេះស្បែកគ្រឿងសេះ1 ដុំ
ក្បាលខ្សែក្រវាត់លង្ហិនមានអណ្ដាតក្បាលខ្សែក្រវាត់លង្ហិនមានអណ្ដាត2 ដុំ
អំបោះលីនិនអំបោះលីនិន1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

កាំបិតកាត់ស្បែកកាំបិតកាត់ស្បែក
ដែកចោះដែកចោះ
ម្ជុលដេរកែបពីរម្ជុលដេរកែបពីរ
ដំបងធ្វើរង្វិលដំបងធ្វើរង្វិល
7

Make the reins

Cut the reins 1 in or 7/8 in by 4 ft. Prepare them for the bit buckles like the bottom of the cheeks, in the flat. Put a 3/4 in covered buckle on the other end of one rein, narrowing its chape to the buckle's width, and narrow the end of the other rein for buckling. Put in the billets, 10 in long, with one loop before the buckle and two behind, "and always put the strong end of the rein in the billet end".

សម្ភារៈសម្រាប់ជំហាននេះ៖

ស្បែកគ្រឿងសេះស្បែកគ្រឿងសេះ1 ដុំ
ក្បាលខ្សែក្រវាត់លង្ហិនមានអណ្ដាតក្បាលខ្សែក្រវាត់លង្ហិនមានអណ្ដាត3 ដុំ
អំបោះលីនិនអំបោះលីនិន1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

កាំបិតកាត់ស្បែកកាំបិតកាត់ស្បែក
ដែកចោះដែកចោះ
ម្ជុលដេរកែបពីរម្ជុលដេរកែបពីរ
ដំបងធ្វើរង្វិលដំបងធ្វើរង្វិល
8

Put it together

Buckle the cheeks to the head strap's wide slits and the throat lash to the narrow ones, run the front over the head strap, buckle the cheeks' lower ends and the reins to the snaffle bit's rings, and buckle the two reins together. Buckled billets let the bit be taken off, which he prefers to stitching the cheeks and reins fast to it.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដែកបង្ហៀរស្នាហ្វលដែកបង្ហៀរស្នាហ្វល1 ដុំ
9

Troubleshooting

Riding bridle troubleshooting.

Flow

Loading...
10

History and honest limits

From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter VI, "Riding Bridles", the snaffle bridle; every fraction was read on the scan. Not made here: his Pelham, Weymouth, gag, exercising and stallion bridles. The bit is bought. The metric figures are ours.

សម្ភារៈ

4

ឧបករណ៍ចាំបាច់

10

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...