កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក

Screw Auger: a Steel Blade Twisted Red-Hot, with a Worm, Two Lips and an Eye for the Cross Handle (Holtzapffel, 1846)
How the common English screw auger was made, from Holtzapffel's Turning and Mechanical Manipulation: a parallel steel blade twisted red-hot, a worm at the point to pull it into the wood, two lips sharpened to cut, and the shaft end forged into an eye for a tightly driven cross handle.
កម្រិតខ្ពស់
A day at the forge
ការណែនាំ
1
1
Twist count
Twist count
កំពុងផ្ទុកសៀវភៅ Jupyter…
2
2
Read Holtzapffel
Read Holtzapffel
"The ordinary screw auger ... is forged as a parallel blade of steel ... it is twisted red-hot."
3
3
Forge the blade
Forge the blade
Draw a steel bar out into a flat, parallel blade, leaving a round end for the shaft. Width, thickness and length are ours: make the blade as wide as the hole you want.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ដែកថែបឧបករណ៍ជាដុំមូល1 ដុំឧបករណ៍ដែលត្រូវការ៖
ឡជាងដែក
ទាំងជល់ (កំណាត់ដែក)
ញញួរ
ដង្កៀបជាងដែក
ហ្វូល័រ (ដែកឆូតប្រហោង)4
4
Twist it red-hot
Twist it red-hot
Heat the blade to red, grip one end in the vice and twist the other with a wrench into an even double spiral. Twist in short heats and keep the pitch even.
ឧបករណ៍ដែលត្រូវការ៖
ឡជាងដែក
ដង្កាប់តុ
ដងបង្វិលដែកកាត់ខ្សែវីសខាងក្នុង
ដង្កៀបជាងដែក5
5
Form the worm and lips
Form the worm and lips
File the point into a worm (a small tapered screw, as on a gimlet) that pulls the auger into the work. Shape and sharpen the two corners, or lips, to cut at the very ends and a little up the sides.
ឧបករណ៍ដែលត្រូវការ៖
ដង្កាប់តុ
ដែកឆាប (ដែកឆាបដៃ)6
6
Forge the eye
Forge the eye
Forge the top of the shaft into a ring or eye.
ឧបករណ៍ដែលត្រូវការ៖
ឡជាងដែក
ទាំងជល់ (កំណាត់ដែក)
ញញួរ
ដង្កៀបជាងដែក7
7
Harden and temper (ours)
Harden and temper (ours)
He gives no hardening. Ours: harden the cutting end and temper it as for other wood-cutting edge tools, then hone the lips.
ឧបករណ៍ដែលត្រូវការ៖
ឡជាងដែក
ធុងជ្រលក់ត្រជាក់
ថ្មសម្លៀង8
8
Fit the cross handle
Fit the cross handle
Shape a hardwood bar and drive it tightly through the eye as a transverse handle.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ក្តារឈើរឹង1 ដុំឧបករណ៍ដែលត្រូវការ៖
កាំបិតទាញពីរដង
ញញួរ9
9
Troubleshooting
Troubleshooting
Screw auger troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
From Charles Holtzapffel, **Turning and Mechanical Manipulation**, vol. II (1846), pp. 540, 543 and 545-546 (checked on the archive.org scan turningmechanica02holtuoft). He also describes the single-lip auger: a half-round bar coiled into an open spiral with the flat side outwards, the end shaped like a shell auger. He gives no sizes or heat treatment: those, the tools and the handle wood are ours.
សម្ភារៈ
2- 1 ដុំកន្លែងទុក
- 1 ដុំកន្លែងទុក
ឧបករណ៍ចាំបាច់
11- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
ប្លង់ពាក់ព័ន្ធ
ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍
CC0 សាធារណៈ
ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។
គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។



