កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Home-Made Screw Micrometer: a Fine-Threaded Bolt and a Paper Dial (Boy Mechanic, 1913)
Penny

បង្កើតដោយ

Penny

14. វិច្ឆិកា 2026DK
10
0
0
0
0

Home-Made Screw Micrometer: a Fine-Threaded Bolt and a Paper Dial (Boy Mechanic, 1913)

A simple micrometer for measuring thin things: a fine-threaded bolt turns through a nut set in a small wooden bench, a wire pointer soldered to its head sweeps a graduated pasteboard dial, and each turn moves the tip down by one thread.
ចាប់ផ្តើម
Two hours

ការណែនាំ

1

Reading the dial

កំពុងផ្ទុកសៀវភៅ Jupyter…
2

Read the Boy Mechanic

"A simple, fairly accurate, and easily made apparatus of the micrometer form may be constructed."
3

Choose the bolt

Get an iron or brass bolt about 1/4 in across and 2-1/2 in long with as fine a thread as possible, threaded nearly to the head, with its nut. Cut a screwdriver slot in the head.

សម្ភារៈសម្រាប់ជំហាននេះ៖

វីសម៉ាស៊ីនវីសម៉ាស៊ីន1 ដុំ
ខ្ចៅប្រាំមួយជ្រុងខ្ចៅប្រាំមួយជ្រុង1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

រណារកាត់ដែករណារកាត់ដែក
ដង្កាប់តុដង្កាប់តុ
4

Make the bench

Clamp two square-cornered wood blocks (about 1 x 3/4 x 2-1/2 in) side by side and nail small pieces across the ends; together they are about 2 in wide. Bore a 1/4 in hole through the centre in the 2 in direction. Unclamp, set the nut into one block in line with the hole, then cut a piece out so the blocks form a little bench. Glue its legs to a thin board about 2-1/2 in square.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្តារឈើរឹងក្តារឈើរឹង1 ដុំ
ដែកគោលដែកគោល1 ដុំ
កាវឈើកាវឈើ1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

រណារដៃរណារដៃ
ស្វាន់ដៃវិលមានក្បាលស្វាន់ដៃវិលមានក្បាល
ឈ្នាប់ដងវែងឈ្នាប់ដងវែង
ដែកឆូតឈើដែកឆូតឈើ
ញញួរញញួរ
5

Pointer and dial

Solder a stiff wire about 2 in long to the bolt head at right angles. Cut a disc of heavy pasteboard with a radius equal to the wire, divide its edge into equal spaces, and fix it on top of the bench. Screw the bolt down through the nut.

សម្ភារៈសម្រាប់ជំហាននេះ៖

លួសដែកទាញលួសដែកទាញ1 ដុំ
ផ្សារសំណប៉ាហាំង-សំណផ្សារសំណប៉ាហាំង-សំណ1 ដុំ
ក្រដាសកាតុងបិទស្រទាប់ក្រដាសកាតុងបិទស្រទាប់1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ដែកផ្សារដែកផ្សារ
ត្រីវិស័យត្រីវិស័យ
6

Anvil

Fix a small piece of wood on the base between the bench legs and glue a small piece of metal on it where the bolt meets it.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្តារឈើរឹងក្តារឈើរឹង1 ដុំ
កាវឈើកាវឈើ1 ដុំ
7

Calibrate and measure

Count the threads in one inch of the bolt on a rule: one turn moves the tip one thread. To measure, screw down onto the object, remove it, screw down to the base, and note how far the wire travels over the dial. Turns (with the part of a turn) divided by threads per inch = thickness in inches.

ឧបករណ៍ដែលត្រូវការ៖

បន្ទាត់បន្ទាត់
8

Troubleshooting

Micrometer troubleshooting.

Flow

Loading...
9

History and honest limits

From **The Boy Mechanic, Book 1** (Popular Mechanics, 1913), p. 130, credited to the Scientific American (checked on the archive.org scan boymechanic0000unse_n5a8). The 1/4-20 bolt and 50-division dial are our example.

សម្ភារៈ

8

ឧបករណ៍ចាំបាច់

10

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...