សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Magnifying Glass from a Hand-Ground Lens
Penny

បង្កើតដោយ

Penny

11. តុលា 2026DK
42
0
0
0
0

Magnifying Glass from a Hand-Ground Lens

A magnifying glass is a convex lens in a frame with a handle. A typical one has a focal length of 25 cm, an optical power of 4 dioptres, and is sold as "2×": its magnifying power is 0.25 m × 4 + 1 = 2 for an eye whose near point is 25 cm. Here the lens is ground plano-convex from crown glass (refractive index about 1.52). For a plano-convex lens the focal length is R / (n − 1), so a 25 cm focal length needs a curve of radius about 13 cm. The lens is then set in a turned wooden ring with a handle; those sizes are ours.
កម្រិតខ្ពស់
2–3 days

ការណែនាំ

1

Grind the lens

Following the lens-grinding blueprint, grind one face of a glass disc to a spherical curve of about 13 cm radius, working down through the grits, then polish it clear with cerium oxide on a pitch lap. Leave the other face flat.

សម្ភារៈសម្រាប់ជំហាននេះ៖

សន្លឹកកែវសន្លឹកកែវ1 ដុំ
កាវជ័រស្រល់កាវជ័រស្រល់100 ក្រ

ឧបករណ៍ដែលត្រូវការ៖

បន្ទាត់បន្ទាត់
គ្រាប់ស៊ីលីកូនកាបួតគ្រាប់ស៊ីលីកូនកាបួត
ម្សៅខាត់សេរីញ៉ូមអុកស៊ីតម្សៅខាត់សេរីញ៉ូមអុកស៊ីត
2

Check the focus

Hold the lens in sunlight and move a card behind it until the spot is smallest; the distance from lens to card is the focal length and should be close to 25 cm. Do not look at the Sun through it.

ឧបករណ៍ដែលត្រូវការ៖

បន្ទាត់បន្ទាត់
3

Turn the frame

Turn a ring from a hardwood blank with a groove on the inside just wider than the lens edge, and part it off.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដុំឈើរឹងដុំឈើរឹង1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ម៉ាស៊ីនកែងឈើម៉ាស៊ីនកែងឈើ
ដែកឆូតកោងដែកឆូតកោង
ដែកកាត់ដាច់ (ម៉ាស៊ីនកិន)ដែកកាត់ដាច់ (ម៉ាស៊ីនកិន)
4

Turn the handle

Turn a handle from a hardwood dowel and fix it into a hole drilled in the ring.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ស្នៀតឈើរឹងស្នៀតឈើរឹង1 ដុំ
អេប៉ុកស៊ីពីរផ្នែកអេប៉ុកស៊ីពីរផ្នែក5 មល

ឧបករណ៍ដែលត្រូវការ៖

ម៉ាស៊ីនកែងឈើម៉ាស៊ីនកែងឈើ
5

Set the lens

Saw the ring through at the handle, spring the lens into the groove, glue the cut closed and wax the wood.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្រមួនឃ្មុំក្រមួនឃ្មុំ10 ក្រ

សម្ភារៈ

6

ឧបករណ៍ចាំបាច់

6

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...