កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក

Pit-Sawing Square Timber and Battens from a Log (Moxon, 1678)
How sawyers and joiners in Moxon's day ripped a log into squares, quarters and battens: lines struck with a chalked string, the log wedged over a saw-pit or on high trestles and plumbed true, and a framed pit-saw worked by a top-man and a pit-man, with wedges in the kerf to keep it open.
មធ្យម
A day per log (two people)
ការណែនាំ
1
1
Setting off a scantling
Setting off a scantling
កំពុងផ្ទុកសៀវភៅ Jupyter…
2
2
Read Mechanick Exercises
Read Mechanick Exercises
"If they would take any Square, Quarter, or Batten, &c. off, they first set off their Scantlin."
3
3
Set off the size
Set off the size
Open the compasses to the size you want plus the saw's kerf (e.g. 70 mm + kerf for a 70 x 70 mm square) and prick that distance from one side at both ends of the log. Set off exactly the size and the piece comes out half a kerf thinner.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ដុំឈើទន់1 ដុំឧបករណ៍ដែលត្រូវការ៖
កុងប៉ាសពីរជើង
ខ្សែវាស់4
4
Line the stuff
Line the stuff
Chalk a line hard, hold it on the pricks at both ends, strain it stiff, lift the middle straight up and let it snap down to leave a chalk line. Mark the underside the same way. Working alone, hook the line on a compass point or a nail at one end.
ឧបករណ៍ដែលត្រូវការ៖
ខ្សែគូសដីស
កុងប៉ាសពីរជើង5
5
Set up over the pit
Set up over the pit
Wedge the log fast over a saw-pit, or on two strong trestles a little more than man-high with four spreading legs. Plumb the side the lines were set from so it hangs exactly upright, or the piece will be thicker at top or bottom.
ឧបករណ៍ដែលត្រូវការ៖
ស្នូលឈើ
ខ្សែបន្ទាត់ឈរ6
6
Saw
Saw
Enter the pit-saw at one end: the top-man on the log guides it exactly in the line and draws it a little towards him on the down stroke; the pit-man below pulls straight down with all his strength, not so far that the handles drop out of reach. On the up stroke bear the teeth off the wood. When the sawn pieces pinch the blade, drive a wedge into the kerf, as far as you dare without splitting it.
ឧបករណ៍ដែលត្រូវការ៖
រណារត្រង់រណ្តៅ (រណារពីរនាក់)
ស្នូលឈើ
ញញួរឈើ7
7
Square and batten
Square and batten
Turn the log and line and saw the other faces the same way to get squares (70 x 70 mm here) and thinner battens.
ឧបករណ៍ដែលត្រូវការ៖
រណារត្រង់រណ្តៅ (រណារពីរនាក់)
ខ្សែគូសដីស
កុងប៉ាសពីរជើង8
8
Troubleshooting
Troubleshooting
Pit-sawing troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From Joseph Moxon, **Mechanick Exercises**, Numb. V, Joinery (1678), §27, pp. 96-98, and Plate 4 M (checked on the archive.org scan mechanickexercis00moxo). Softwood, the 70 mm size and the kerf figure are ours.
CC0 សាធារណៈ
ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។
គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

