សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក

Plywood Sheet: Sawn Veneer Cross-Laid with Hide Glue
Plywood is thin wood laid in layers with the grain of each crossing the next, an odd number so the sheet stays flat; it splits less and swells less than solid board. Glued with hot hide glue, the woodworking glue of veneering since antiquity, and pressed flat overnight.
The picture: our diagram of the crossed plies.
មធ្យម
A day, plus a night under pressure
ការណែនាំ
1
1
Cut the leaves
Cut the leaves
Cut five veneer leaves a little larger than the finished sheet: three with the grain running one way, two across.
សម្ភារៈសម្រាប់ជំហាននេះ៖
សន្លឹកឈើស្រទាប់ស្ដើង5 សន្លឹកឧបករណ៍ដែលត្រូវការ៖
កាំបិតសិប្បកម្ម
គែមត្រង់
ខ្សែវាស់2
2
Heat the glue
Heat the glue
Warm the hide glue in a double boiler to about 60 °C. It gels as it cools, so work steadily.
សម្ភារៈសម្រាប់ជំហាននេះ៖
កាវស្បែកសត្វ0.2 គក
ទឹក0.3 លីត្រឧបករណ៍ដែលត្រូវការ៖
ឆ្នាំងស្ទួនដាំដោយចំហុយ
ទែម៉ូម៉ែត្រអានភ្លាម3
3
Lay up crossed
Lay up crossed
Brush glue on one face of each inner leaf and stack them, turning each leaf's grain at right angles to the one below; both outside leaves run the same way.
ឧបករណ៍ដែលត្រូវការ៖
ជក់កាវ4
4
Press overnight
Press overnight
Put the stack between flat boards straight away and load it with weights or clamps evenly over the whole area. Leave it overnight.
ឧបករណ៍ដែលត្រូវការ៖
ក្ដារឈើរាបសម្រាប់សង្កត់ (មួយគូ)
ដុំទម្ងន់សង្កត់
ដង្កៀបរាងអក្សរ C5
5
Trim
Trim
Saw the edges square and plane off squeezed-out glue.
ឧបករណ៍ដែលត្រូវការ៖
រណារដៃ
កាំបិតឈូសឈើដៃ
គែមត្រង់6
6
Plies and thickness
Plies and thickness
កំពុងផ្ទុកសៀវភៅ Jupyter…
សម្ភារៈ
3- 5 សន្លឹកកន្លែងទុក
- 0.2 គកកន្លែងទុក
- 0.3 លីត្រកន្លែងទុក
ឧបករណ៍ចាំបាច់
11- កន្លែងទុក
- កន្លែងទុក
- 1 vendor sell this, none ship to you yetកន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
ប្លង់នេះធ្វើ
ប្លង់ពាក់ព័ន្ធ
ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍
CC0 សាធារណៈ
ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។
គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។



