សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Polystyrene: Styrene Polymerised by Heat Alone in Sealed Tubes
Charlie

បង្កើតដោយ

Charlie

20. តុលា 2026DE
12
0
0
0
0

Polystyrene: Styrene Polymerised by Heat Alone in Sealed Tubes

Polystyrene is styrene joined into long chains: a tough, glass-clear solid. Heat alone does it. Ostromislensky (US 1,683,402, 1928) sealed pure styrene in glass tubes and held them at 140 °C for 20 hours; hotter goes faster (155 °C 18 h, 165 °C 16 h), but at 175 °C another, unwanted form starts to appear. As it cools the polystyrene shrinks away from the glass and usually breaks the tube. The picture: our diagram.
មធ្យម
1 day

ការណែនាំ

1

Fill and seal the tubes

Use styrene of 92 % purity or better. Fill glass tubes about 0.7 cm wide and 26 cm long to about 4.5 cm (a sixth of the tube) and seal them. Ours: seal in a torch flame (the patent does not say how).

សម្ភារៈសម្រាប់ជំហាននេះ៖

ស្ទីរ៉ែនស្ទីរ៉ែន4.5 មល

ឧបករណ៍ដែលត្រូវការ៖

ឈុតបំពង់កញ្ចក់ឈុតបំពង់កញ្ចក់
ចង្កៀងភ្លើងប្រូផានចង្កៀងភ្លើងប្រូផាន
វ៉ែនតាការពារការខ្ចាយគីមីវ៉ែនតាការពារការខ្ចាយគីមី
ស្រោមដៃកៅស៊ូស្រោមដៃកៅស៊ូ
ទូបឺតចំហាយ (មានបំពង់)ទូបឺតចំហាយ (មានបំពង់)
2

Heat at 140 °C for 20 hours

Stand the tubes upright with their lower part in an air bath at about 140 °C for 20 hours (ours: a drying oven). Shorter at higher heat: 155 °C 18 h or 165 °C 16 h. Do not go above 175 °C.

ឧបករណ៍ដែលត្រូវការ៖

ឡសម្ងួតឡសម្ងួត
ទែម៉ូម៉ែត្រមន្ទីរពិសោធន៍ទែម៉ូម៉ែត្រមន្ទីរពិសោធន៍
3

Cool and break out

Let the tubes cool. The polystyrene comes away from the glass and usually breaks it. Remove the glass and break the clear solid into small pieces: it is very tough and hard to grind.

ឧបករណ៍ដែលត្រូវការ៖

ស្រោមដៃធន់កម្តៅស្រោមដៃធន់កម្តៅ
វ៉ែនតាការពារការខ្ចាយគីមីវ៉ែនតាការពារការខ្ចាយគីមី

សម្ភារៈ

1
  • កន្លែងទុក

ឧបករណ៍ចាំបាច់

8

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...