កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Printed Protractor on Pasteboard
បានបកប្រែ
Mark

បង្កើតដោយ

Mark

11. តុលា 2026FI
106
0
0
1
0

Printed Protractor on Pasteboard

A protractor is a half circle divided into 180 degrees. Drawn in millimetres on an A4 page with an 80 mm radius, every degree mark is about 1.4 mm apart, enough to read to a degree. Printed at actual size and glued to stiff pasteboard, it measures as well as a shop one for paper and wood work. A 100 mm check line on the sheet catches a printer that shrinks the page. Download: /uploads/blueprints/protractor-a4-180.pdf
ចាប់ផ្តើម
45 minutes

ការណែនាំ

1

Print at actual size

Download the protractor sheet and print it with 'Actual size' (100 %), never 'Fit to page'. Measure the check line: it must be 100 mm.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្រដាសក្រដាស1 សន្លឹក

ឧបករណ៍ដែលត្រូវការ៖

កុំព្យូទ័រតុកុំព្យូទ័រតុ
ម៉ាស៊ីនព្រីនបាញ់ទឹកថ្នាំម៉ាស៊ីនព្រីនបាញ់ទឹកថ្នាំ
បន្ទាត់បន្ទាត់
2

Download the protractor sheet

The protractor sheet, used as step 1 describes.
ឯកសាររចនាPDFCC0 - Free
3

Why actual size matters

Printing a measuring sheet so it stays true.
4

Glue to pasteboard

Brush warm hide glue thinly over a piece of pasteboard, lay the print on it, smooth it from the middle out and press it flat under a weight until dry.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្រដាសកាតុងបិទស្រទាប់ក្រដាសកាតុងបិទស្រទាប់1 សន្លឹក
កាវស្បែកសត្វកាវស្បែកសត្វ10 ក្រ

ឧបករណ៍ដែលត្រូវការ៖

ឆ្នាំងស្ទួនដាំដោយចំហុយឆ្នាំងស្ទួនដាំដោយចំហុយ
បន្ទះកម្តៅបន្ទះកម្តៅ
ជក់កាវជក់កាវ
ទម្ងន់ទម្ងន់
5

Cut it out

On the cutting mat, cut along the straight baseline exactly and round the arc a few millimetres outside the marks.

ឧបករណ៍ដែលត្រូវការ៖

កាំបិតសិប្បកម្មកាំបិតសិប្បកម្ម
កម្រាលកាត់ដែលជាសះស្បើយខ្លួនឯងកម្រាលកាត់ដែលជាសះស្បើយខ្លួនឯង
បន្ទាត់បន្ទាត់
6

Check it

Measure the baseline from the 0° mark to the 180° mark through the centre cross: it should be 160 mm. Check that 90° stands square to the baseline.

ឧបករណ៍ដែលត្រូវការ៖

បន្ទាត់បន្ទាត់

សម្ភារៈ

3

ឧបករណ៍ចាំបាច់

9

ឯកសាររចនា

1

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...