សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Quarter-Twist Spiral Dash Churn: Wings Twisted Between Arms Set at Right Angles
Woody

បង្កើតដោយ

Woody

6. តុលា 2026NO
3
0
0
0
0

Quarter-Twist Spiral Dash Churn: Wings Twisted Between Arms Set at Right Angles

The Hights made the wings of a horizontal box-churn dash into a screw. Cornelius R. Hight and John Hight of Geneva, Illinois, received US 7,490, dated 9 July 1850, for a "reacting spiral revolving dash" in a box churn: a shaft with four arms, those at one end at right angles to those at the other, and two wings fastened from arm to arm "so as to produce a quarter twist in the wings as they extend along the shaft." Its revolution produces "opposite currents, in the cream"; reversed, "the butter collects at the ends of the wings." This rung works out the wings' pitch, then prints the dash in one piece, fits it in a box, and makes butter.
មធ្យម
About 3 hours, plus printing

ការណែនាំ

1

The quarter twist

កំពុងផ្ទុកសៀវភៅ Jupyter…
2

Oblique wings on a horizontal arbor before it

The embedded blueprint sets straight wings at 30° to the axle. The Hights twist theirs a quarter turn from end to end, like a screw.
3

Read US 7,490

"The peculiar construction of the dash, consists in setting the arms to which the wings are attached, at right angles, upon opposite sides of the shaft, so as to produce a quarter twist in the wings as they extend along the shaft from one arm to the other."
4

Print the dash

Print the dash on end in one piece with supports (/uploads/blueprints/quarter-twist-spiral-dash-churn-dash.stl): shaft, four arms and two wings each twisted a quarter turn. Print the crank arm (/uploads/blueprints/quarter-twist-spiral-dash-churn-crank-arm.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

សម្ភារៈសម្រាប់ជំហាននេះ៖

សរសៃ PETGសរសៃ PETG1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ម៉ាស៊ីនបោះពុម្ព 3D ប្រើខ្សែ (FDM)ម៉ាស៊ីនបោះពុម្ព 3D ប្រើខ្សែ (FDM)
5

Fit the box

Take a food-safe box about 220 × 150 × 160 mm, its proportions close to his 18 × 12 × 13 inches. Drill both ends on the axis 80 mm up. Push a 10 mm square hardwood shaft through one end, the dash and the other end, with a leather washer at each.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ធុងស្តុកកម្រិតម្ហូបអាហារធុងស្តុកកម្រិតម្ហូបអាហារ1 ដុំ
ដែកគោលឈើរឹងដែកគោលឈើរឹង1 ដុំ
ចំណិតស្បែកចំណិតស្បែក1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ស្វានឥតខ្សែស្វានឥតខ្សែ
សំណុំក្បាលខួងសំណុំក្បាលខួង
រណារដៃរណារដៃ
6

Crank and lid

Glue the crank arm and a dowel handle on the shaft's outer end, and fit the box's lid, as his rabbeted cover.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដែកគោលឈើរឹងដែកគោលឈើរឹង1 ដុំ
កាវឈើកាវឈើ1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ក្រដាសខាត់ក្រដាសខាត់
7

The patent drawing

US 7,490 drawing sheet, public domain (expired patent).
ជំហាន 7 - Image 1
8

Churn, then reverse to collect

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Crank steadily; time until the butter comes. Then reverse the crank so the butter collects at the ends of the wings, as they said. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្រែមខាប់ក្រែមខាប់1500 មល
អំបិលសមុទ្រគ្រើមអំបិលសមុទ្រគ្រើម1 ដុំ
ទឹកទឹក1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ទែម៉ូម៉ែត្រមានចុងដោតទុកទែម៉ូម៉ែត្រមានចុងដោតទុក
នាឡិកាបញ្ឈប់នាឡិកាបញ្ឈប់
ជញ្ជីងឌីជីថលផ្ទះបាយជញ្ជីងឌីជីថលផ្ទះបាយ
ចានលាយធំដែកអ៊ីណុកចានលាយធំដែកអ៊ីណុក
9

Wings that scrape, butter that won't collect

Quarter-twist spiral dash troubleshooting.

Flow

Loading...
10

History and honest limits

**Cornelius R. Hight and John Hight** of Geneva, Kane County, Illinois, received US 7,490, dated 9 July 1850. Their wings could be wood or tin, split into the arms with a saw and fastened with brads or small screws; the wing's inner border was cut to arcs of 16- and 23-inch circles; the dash ran on a coupling gudgeon in a cast box and a screw pivot. They wrote it made butter "in from 5 to 8 minutes"; that is their claim, not our measurement. They claimed the application of a reacting spiral revolving dash to a box churn or any of the usual forms of churns. **Honest limits.** A food-safe box and a printed dash stand in for theirs, and our wings twist evenly rather than following their curved borders. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.

សម្ភារៈ

8

ឧបករណ៍ចាំបាច់

9

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...