កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Quick-Acting Hardwood Bench Vise with Cam and Drop Roll (Boy Mechanic, 1919)
Woody

បង្កើតដោយ

Woody

14. វិច្ឆិកា 2026NO
7
0
0
0
0

Quick-Acting Hardwood Bench Vise with Cam and Drop Roll (Boy Mechanic, 1919)

A home-made bench vise entirely of hard wood: the front jaw slides in and out on arm C, a loose roll A drops into place to lock it, a cam lever in front gives the final squeeze, and the pivoted jaw B tilts to grip work whose sides are not parallel.
មធ្យម
A day

ការណែនាំ

1

Sizes in mm

កំពុងផ្ទុកសៀវភៅ Jupyter…
2

Read the Boy Mechanic

"A detail is given of each part, with dimensions, so that it is not difficult to make it from hard wood."
3

Cut the parts to the drawing

Cut every part from hard wood to the sizes in the drawing: the 6-1/2 x 7-3/8 x 3/4 in plate with its 2-5/16 x 2-7/16 in opening, the 6-1/2 x 4 x 1 in slotted plate, the 5 x 5-1/2 x 1/2 in plate, the blocks, the forked piece, the long bar drawn at the bottom (2 x 1-3/8 in; we take it to be arm C) and the cam lever (5-1/2 in between centres, 5/16 in pin hole; its edge view is drawn 5/8 in).

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្តារឈើរឹងក្តារឈើរឹង1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

រណារដៃរណារដៃ
រណារកាត់ខ្សែកោងរណារកាត់ខ្សែកោង
ដែកឆូតឈើដែកឆូតឈើ
ស្វាន់ដៃវិលមានក្បាលស្វាន់ដៃវិលមានក្បាល
4

Turn roll A

Make roll A, a round hardwood roll 1-1/16 in across and 1-7/8 in long.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ស្នៀតឈើរឹងស្នៀតឈើរឹង1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

រណារដៃរណារដៃ
5

Assemble under the bench

Fit the parts under the bench top as the section view shows: arm C slides through the fixed part, roll A sits in its curved seat behind the jaw so it can drop and wedge the arm, jaw B is pivoted so it swings loose, and the cam lever is pinned at the front. Screw and bolt the fixed parts to the bench.

សម្ភារៈសម្រាប់ជំហាននេះ៖

វីសឈើវីសឈើ1 ដុំ
ប៊ូឡុងក្បាលមូលប៊ូឡុងក្បាលមូល1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ស្វាន់ដៃវិលមានក្បាលស្វាន់ដៃវិលមានក្បាល
ញញួរញញួរ
6

Use it

To open: turn the cam, then lift the front of the vise to free roll A, and slide the front jaw out to the size of the work. Put the work in: roll A drops into place and clamps arm C. Turn the cam to tighten.
7

Troubleshooting

Wooden vise troubleshooting.

Flow

Loading...
8

History and honest limits

From **The Boy Mechanic, Book 3** (Popular Mechanics, 1919), p. 85, by J. C. Hansen (checked on the archive.org scan boymechanic0003unse). The text names only roll A, jaw B, arm C and the cam; build the other pieces as drawn. Metric figures are ours.

សម្ភារៈ

4

ឧបករណ៍ចាំបាច់

5

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...