សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Ripstop Nylon: Doubled Threads Woven in Every 5 to 8 mm, Both Ways
Tex

បង្កើតដោយ

Tex

18. តុលា 2026FO
10
0
0
0
0

Ripstop Nylon: Doubled Threads Woven in Every 5 to 8 mm, Both Ways

Ripstop is cloth with a grid of stronger threads woven in every 5 to 8 mm, both ways (Wikipedia). A small tear runs only as far as the next line of the grid. In the Army's parachute nylon (US 3,032,072, 1962) the rip-stop threads go in as doubled pairs, warp and weft, with ordinary threads between. The picture: ripstop fabric, the grid of doubled threads showing (Wikimedia Commons).
មធ្យម
Days

ការណែនាំ

1

Wind the warp with doubled pairs

Wind a nylon warp. Every 5 to 8 mm, wind a pair of threads instead of one: these doubled pairs are the warp rip-stops.

សម្ភារៈសម្រាប់ជំហាននេះ៖

សរសៃសំយោគណេឡុងសរសៃសំយោគណេឡុង300 ក្រ

ឧបករណ៍ដែលត្រូវការ៖

ក្ដារវាស់អំបោះបណ្ដោយក្ដារវាស់អំបោះបណ្ដោយ
បន្ទាត់បន្ទាត់
2

Dress the loom

Thread the warp on the loom, each doubled pair kept together as one rip-stop.

ឧបករណ៍ដែលត្រូវការ៖

តម្បាញសិតរឹងតម្បាញសិតរឹង
3

Weave, doubling the weft too

Weave with nylon weft. Every 5 to 8 mm, lay a doubled pick: the weft rip-stops cross the warp ones in a grid.

ឧបករណ៍ដែលត្រូវការ៖

តម្បាញសិតរឹងតម្បាញសិតរឹង
ត្រល់តម្បាញត្រល់តម្បាញ
បន្ទាត់បន្ទាត់
4

Take it off and test a tear

Cut the cloth off the loom. Nick a scrap and pull: the tear should stop at the next line of the grid.

ឧបករណ៍ដែលត្រូវការ៖

កន្ត្រៃកាត់ក្រណាត់កន្ត្រៃកាត់ក្រណាត់

សម្ភារៈ

1

ឧបករណ៍ចាំបាច់

5

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...