សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Rotary-and-Vibrating Dasher Churn: Turn to Churn, Lift and Plunge to Gather
Nash wanted to switch from churning to gathering "without changing the connection of the machinery."
William R. Nash of Bridgeport, Connecticut, received US 7,348, dated 7 May 1850, for working rotary and vertical churn-dashers on one shaft. A rotary dasher of four radial hollow prismatic arms, each with a hole in its forward side near the shaft and an aperture in its rear side near its end, turns above a perforated vibrating dasher held between collars. The pinion on the lid drives the shaft by a pin in a notch, "but the shaft being free to slide vertically upward," the handle on top can work the vibrating dasher up and down.
This rung looks at the hollow arms, then prints both dashers and the notched pinion, fits them in a box, and makes butter.
មធ្យម
About 4 hours, plus printing
ការណែនាំ
1
1
Air through the arms
Air through the arms
កំពុងផ្ទុកសៀវភៅ Jupyter…
2
2
Rotary and reciprocating dashers on one spindle before it
Rotary and reciprocating dashers on one spindle before it
The embedded blueprint works both dashers at once from one crank. Nash uses them one after the other: rotary to churn, vibrating to gather.
3
3
Read US 7,348
Read US 7,348
"The nature of this invention consists, principally in so arranging and combining in the same churn and upon one shaft, a horizontal rotary dasher and a vertically vibrating dasher, that while the rotary dasher is operated for the purpose of agitating the cream, the vibrating dasher remains at rest; and that when the butter is produced, the vibrating dasher may be operated for the purpose of gathering or consolidating the butter."
4
4
Print the parts
Print the parts
Print the rotary dasher with its four hollow triangular arms (/uploads/blueprints/rotary-and-vibrating-dasher-churn-rotary-dasher.stl), the perforated vibrating dasher (/uploads/blueprints/rotary-and-vibrating-dasher-churn-vibrating-dasher.stl), the notched pinion (/uploads/blueprints/rotary-and-vibrating-dasher-churn-notched-pinion.stl) and the crank arm (/uploads/blueprints/rotary-and-vibrating-dasher-churn-crank-arm.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
សម្ភារៈសម្រាប់ជំហាននេះ៖
សរសៃ PETG1 ដុំឧបករណ៍ដែលត្រូវការ៖
ម៉ាស៊ីនបោះពុម្ព 3D ប្រើខ្សែ (FDM)5
5
Shaft and dashers
Shaft and dashers
Use a 12 mm hardwood dowel as the shaft, squared where the rotary dasher sits. Glue two collars of short dowel on it either side of the vibrating dasher so it is carried up and down but turns freely, and glue the rotary dasher 30 mm above. Drill a cross hole for a steel pin just above where the pinion will sit, and fit a handle on top.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ដែកគោលឈើរឹង1 ដុំ
ដែកទន់ដុំមូល1 ដុំ
កាវឈើ1 ដុំឧបករណ៍ដែលត្រូវការ៖
រណារដៃ
ស្វានឥតខ្សែ
សំណុំក្បាលខួង
រណារកាត់ដែក6
6
Lid, pinion and crank
Lid, pinion and crank
Take a food-safe square box about 170 mm each way and cut a two-part plywood lid, one part removable. Seat the pinion on the lid round the shaft, the pin lying in its notch. Mount a crown wheel on a short crank shaft between two posts on the lid so its pegs mesh the pinion, as his gear wheel I, and fit the crank arm.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ធុងស្តុកកម្រិតម្ហូបអាហារ1 ដុំ
សន្លឹកឈើបន្ទះ1 ដុំ
ក្តារឈើស្រល់1 ដុំដែកគោលឈើរឹង1 ដុំ
វីសឈើ #8 × ១ អ៊ីញ1 ដុំឧបករណ៍ដែលត្រូវការ៖
រណារកាត់ខ្សែកោងស្វានឥតខ្សែ
ឈុតទួណឺវីស7
7
The patent drawing
The patent drawing
US 7,348 drawing sheet, public domain (expired patent).
8
8
Churn by crank, gather by hand
Churn by crank, gather by hand
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Turn the crank; time until the butter comes. Then work the handle up and down, so the vibrating dasher gathers the butter while the gearing rests. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ក្រែមខាប់1500 មល
អំបិលសមុទ្រគ្រើម1 ដុំ
ទឹក1 ដុំឧបករណ៍ដែលត្រូវការ៖
ទែម៉ូម៉ែត្រមានចុងដោតទុក
នាឡិកាបញ្ឈប់
ជញ្ជីងឌីជីថលផ្ទះបាយ
ចានលាយធំដែកអ៊ីណុក9
9
A pin that jumps, a dasher that turns
A pin that jumps, a dasher that turns
Rotary-and-vibrating dasher troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**William R. Nash** of Bridgeport, Fairfield County, Connecticut, received US 7,348, dated 7 May 1850. His lid was in two parts so one could be removed "without disturbing" the other; "one or more additional rotary dashers, may be attached to the vertical shaft." He claimed the application of the shaft to give a vertical reciprocating movement to the vibrating dasher and a rotary one to the others, so either can be used.
**Honest limits.** A pegged crown wheel and pinion stand in for his gear wheel and pinion; a food-safe box and printed dashers for his. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
សម្ភារៈ
11- 1 ដុំកន្លែងទុក
- 1 ដុំកន្លែងទុក
- 1 ដុំកន្លែងទុក
- 1 ដុំកន្លែងទុក
- កន្លែងទុក
- 1 ដុំកន្លែងទុក
- 1 ដុំកន្លែងទុក
- 1 ដុំកន្លែងទុក
- 1500 មលកន្លែងទុក
- 1 ដុំកន្លែងទុក
- 1 ដុំកន្លែងទុក
ឧបករណ៍ចាំបាច់
11- កន្លែងទុក
- កន្លែងទុក
- 1 vendor sell this, none ship to you yetកន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
ប្លង់ពាក់ព័ន្ធ
ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍
Double-Motion Dasher Churn: One Crank Spins One Dasher and Plunges the Other
ដោយ Emma
ម្ហូប និង ភេសជ្ជៈ
10
0
0
0
0
0
Whirl-Frame Air Dasher Churn: Free Wheels Spun by the Milk Inside a Revolving Frame
ដោយ Martin
ម្ហូប និង ភេសជ្ជៈ
4
0
0
0
0
0
Hollow-Arm Air Churn: A Spinning Dasher That Breathes Air Into the Cream
ដោយ Emma
ម្ហូប និង ភេសជ្ជៈ
3
0
0
0
0
0
CC0 សាធារណៈ
ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។
គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។