កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Small Magnet: a Steel Bar Magnetised by Electric Induction (Work, 1892)
Ed

បង្កើតដោយ

Ed

7. វិច្ឆិកា 2026FI
4
0
0
0
0

Small Magnet: a Steel Bar Magnetised by Electric Induction (Work, 1892)

A permanent magnet made from a steel bar. Work (1892) names three ways to magnetise steel: single touch, double touch, and electric induction. Induction needs no magnet to start with: wind several coils of insulated copper wire over the bar and send a frequently interrupted current through them for several minutes. A Leclanché battery will do, with wire of any size from No. 20 to 30. Bar size, steel grade and the way the current is interrupted are not given. Source: Work No. 180 (27 August 1892), p. 382, answers by G. E. B. Picture: our diagram.
ចាប់ផ្តើម
Several minutes (magnetising)

ការណែនាំ

1

Read the source

"Magnetising by electric induction is effected by winding over the bar several coils of insulated copper wire, and sending a frequently interrupted current of electricity through the coil for several minutes." (Work, 27 August 1892.) For a bar magnet, the answer above it adds: "The current from your Leclanché battery will do, and the wire may be of any size from 20 to 30."
2

Wind the coil

Wind several coils of insulated copper wire, No. 20 to 30, over the steel bar. Bar size, steel grade and number of turns are not given (unknown); for small magnets the same writer prefers steel of hard temper. Ours: steel bar stock, enamelled copper wire.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដងដែកថែបឆៅដងដែកថែបឆៅ1 bar

ឧបករណ៍ដែលត្រូវការ៖

ខ្សែទង់ដែងស្រោបអេណាមែលខ្សែទង់ដែងស្រោបអេណាមែល
វិមាត្រមិនស្គាល់វិមាត្រមិនស្គាល់
3

Send an interrupted current

Connect the coil to a Leclanché battery and make and break the current again and again for several minutes. How the current is interrupted is not given (unknown).

ឧបករណ៍ដែលត្រូវការ៖

អាគុយអាគុយ
ខ្សែទង់ដែងស្រោបអេណាមែលខ្សែទង់ដែងស្រោបអេណាមែល
4

History and honest limits

By single touch, the north end of a permanent magnet is drawn from the middle of the bar to one end a dozen times or more, and the other half is stroked the same way with the south pole; double touch uses two magnets at once from the middle outwards, which is quicker and makes a stronger magnet. Steel bars can also be magnetised by stroking them on the field-magnets of a dynamo. Not given: bar size, steel grade, number of turns, how the current is interrupted.

សម្ភារៈ

1

ឧបករណ៍ចាំបាច់

3

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...