សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក

Terephthalic Acid: Para-Xylene Oxidised by Air with Manganese and Bromide
Terephthalic acid is the acid half of PET. Both methyl groups of para-xylene are burnt to acid groups by air under pressure in hot acetic acid, with a little manganese salt and bromide as catalyst: the Mid-Century process of Saffer and Barker (US 2,833,816, 1958). The acid does not dissolve, so it is simply filtered off. Example 24 of the patent, all parts by weight.
The picture: our diagram of the reactor.
កម្រិតខ្ពស់
1 day
ការណែនាំ
1
1
Charge the reactor
Charge the reactor
Into a corrosion-resistant pressure reactor with a water-cooled condenser on top, put 75 parts para-xylene, 150 parts acetic acid, 1 part manganese acetate (tetrahydrate) and 0.75 part ammonium bromide.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ប៉ារ៉ា-ស៊ីលីន75 partsឧបករណ៍ដែលត្រូវការ៖
អាស៊ីតអាសេទិក (ក្លាស្យាល)
ម៉ង់ហ្គាណែសអាសេតាត
អាម៉ូញ៉ូមប្រូមីត
ជញ្ជីងចានពីរ
ម៉ាស៊ីនប្រតិកម្មសម្ពាធ
បំពង់មូររបស់កូនដង់សឺរ
វ៉ែនតាការពារការខ្ចាយគីមី
ស្រោមដៃធន់នឹងគីមី2
2
Pressurise with air and heat to 385 °F
Pressurise with air and heat to 385 °F
Raise the pressure to 400 psig with air, blown in near the bottom. Set the vent so gas leaves at 3,000 volumes per hour per volume of liquid. Heat to 385 °F (196 °C), then switch the heat off: the reaction heats itself.
ឧបករណ៍ដែលត្រូវការ៖
ម៉ាស៊ីនប្រតិកម្មសម្ពាធ
ម៉ាស៊ីនបញ្ចេញខ្យល់សម្ពាធឧស្សាហកម្ម
បំពង់មូររបស់កូនដង់សឺរ
ទែម៉ូម៉ែត្រមន្ទីរពិសោធន៍3
3
Hold at 385–400 °F
Hold at 385–400 °F
Once the first rush is over, heat as needed to hold 385–400 °F (196–204 °C), 1.5 hours in all. It is finished when the exit gas is back to 20–21 % oxygen (Orsat analysis).
ឧបករណ៍ដែលត្រូវការ៖
ម៉ាស៊ីនប្រតិកម្មសម្ពាធ
ទែម៉ូម៉ែត្រមន្ទីរពិសោធន៍
ឧបករណ៍វិភាគឧស្ម័នអូស្សាត4
4
Cool, empty and filter
Cool, empty and filter
Cool to 185 °F (85 °C) and let the pressure off. Push the liquid out at 150–200 °F with nitrogen pressure, scrape out the solid, and filter everything together.
ឧបករណ៍ដែលត្រូវការ៖
ធុងឧស្ម័នអាសូត
ចីវកញ្ចក់មានដង
ក្រដាសត្រង
ស្រោមដៃធន់នឹងគីមី5
5
Wash and dry
Wash and dry
Wash the terephthalic acid twice with hot acetic acid (75 ml each in the example) and dry it. The patent got 115 parts by weight from 100 of para-xylene.
ឧបករណ៍ដែលត្រូវការ៖
អាស៊ីតអាសេទិក (ក្លាស្យាល)
ចីវកញ្ចក់មានដង
ក្រដាសត្រង
ឡសម្ងួតសម្ភារៈ
1- 75 partsកន្លែងទុក
ឧបករណ៍ចាំបាច់
15- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
ប្លង់នេះធ្វើ
ប្លង់ពាក់ព័ន្ធ
ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍
CC0 សាធារណៈ
ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។
គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

