សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
The Tank-Headed Self-Feeding Brush: Soap in the Tank, a Plate to Meter It
Martin

បង្កើតដោយ

Martin

6. តុលា 2026NO
14
0
0
0
0

The Tank-Headed Self-Feeding Brush: Soap in the Tank, a Plate to Meter It

Scrubbing a floor means going back to the bucket every few strokes. Ernest N. Broderick of Indianapolis received US 639,348, dated 19 December 1899, for a cleaning brush with a small tank on its perforated top, fed through a hollow handle from a hose; a perforated plate slid by a screw sets how far the holes open, and soap in the tank turns the water to suds — "a self-feeding brush." This rung works out how the sliding plate opens the holes, then builds the tank on a scrub brush and measures the flow at each plate setting.
មធ្យម
About 4 hours

ការណែនាំ

1

Open area of the plate

កំពុងផ្ទុកសៀវភៅ Jupyter…
2

A scrubbing brush before it

The embedded blueprint holds two brush heads on a sprung holder. Broderick puts a water tank on the head and feeds it through the handle.
3

Read US 639,348

"When used for scrubbing, the hose can be connected to a hydrant, and thus supply the desired amount of water to the brush, making it unnecessary to dip the brush into the bucket or tub of water. In other words, my device is a self-feeding brush. Should I desire to use soapy water, I can insert through the openings 10 particles of soap or soap powder. In this way I get soapsuds, which I use in scrubbing as it is needed, keeping the brush constantly supplied."
4

Perforate the brush back

Drill fourteen 4 mm holes through the scrub brush's back between the tufts, in two rows 30 mm apart.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ច្រាសដុសច្រាសដុស1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ដង្កាប់តុដង្កាប់តុ
ស្វានឥតខ្សែស្វានឥតខ្សែ
សំណុំក្បាលខួងសំណុំក្បាលខួង
ប៊ិចសម្គាល់អចិន្ត្រៃយ៍ប៊ិចសម្គាល់អចិន្ត្រៃយ៍
បន្ទាត់បន្ទាត់
វ៉ែនតាសុវត្ថិភាពថ្លាវ៉ែនតាសុវត្ថិភាពថ្លា
5

Make the sliding plate

Cut an aluminium plate 10 mm shorter than the back. Drill it through the back's holes, then file its end square. Rivet two guide strips to the back's top so it slides lengthwise.

សម្ភារៈសម្រាប់ជំហាននេះ៖

សន្លឹកអាលុយមីញ៉ូមសន្លឹកអាលុយមីញ៉ូម1 ដុំ
គោលរីវេតទាញគោលរីវេតទាញ1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

កន្ត្រៃកាត់សន្លឹកលោហៈកន្ត្រៃកាត់សន្លឹកលោហៈ
ស្វានឥតខ្សែស្វានឥតខ្សែ
សំណុំក្បាលខួងសំណុំក្បាលខួង
ដែកកិន (ដែកកិនដៃ)ដែកកិន (ដែកកិនដៃ)
ឈុតកាំភ្លើងគោលរីវេតឈុតកាំភ្លើងគោលរីវេត
6

Build the tank

Fold an aluminium box 50 mm deep to the back's size with a lid. Drill the lid for a 25 mm filling hole and a handle socket. Seal it to the back with silicone and screws.

សម្ភារៈសម្រាប់ជំហាននេះ៖

សន្លឹកអាលុយមីញ៉ូមសន្លឹកអាលុយមីញ៉ូម1 ដុំ
គោលរីវេតទាញគោលរីវេតទាញ1 ដុំ
សារធាតុបិទស៊ីលីកូនសារធាតុបិទស៊ីលីកូន1 ដុំ
វីសឈើ #8 × ១ អ៊ីញវីសឈើ #8 × ១ អ៊ីញ1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

កន្ត្រៃកាត់សន្លឹកលោហៈកន្ត្រៃកាត់សន្លឹកលោហៈ
ដង្កាប់តុដង្កាប់តុ
ឈុតកាំភ្លើងគោលរីវេតឈុតកាំភ្លើងគោលរីវេត
ស្វានឥតខ្សែស្វានឥតខ្សែ
សំណុំក្បាលខួងសំណុំក្បាលខួង
ស្រោមដៃការងារស្បែកស្រោមដៃការងារស្បែក
7

Fit the adjusting screw

Run an M4 screw through a nut epoxied on the tank's end wall so its tip pushes the plate. Turn it to close or open the holes.

សម្ភារៈសម្រាប់ជំហាននេះ៖

វីសម៉ាស៊ីនវីសម៉ាស៊ីន1 ដុំ
ខ្ចៅប្រាំមួយជ្រុងខ្ចៅប្រាំមួយជ្រុង1 ដុំ
អេប៉ុកស៊ីពីរផ្នែកអេប៉ុកស៊ីពីរផ្នែក1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ស្វានឥតខ្សែស្វានឥតខ្សែ
សំណុំក្បាលខួងសំណុំក្បាលខួង
ឈុតទួណឺវីសឈុតទួណឺវីស
8

Fit the handle

Fix 1.2 m of 15 mm copper tube in the socket with brass fittings. Fit a ball valve and hose connector at its top.

សម្ភារៈសម្រាប់ជំហាននេះ៖

បំពង់ស្ពាន់បំពង់ស្ពាន់1 ដុំ
គ្រឿងភ្ជាប់លង្ហិនគ្រឿងភ្ជាប់លង្ហិន1 ដុំ
វ៉ាល់បាល់វ៉ាល់បាល់1 ដុំ
ខ្សែបិទខ្សែរបត់ PTFEខ្សែបិទខ្សែរបត់ PTFE1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ឧបករណ៍កាត់បំពង់ឧបករណ៍កាត់បំពង់
សោរបង្វិលកែតម្រូវបានសោរបង្វិលកែតម្រូវបាន
9

The patent drawing

US 639,348 drawing sheet, public domain (expired patent).
ជំហាន 9 - Image 1
10

Measure the flow at each setting

Connect the garden hose. Set the plate fully open, half and nearly shut, and catch the water for 30 s each in the jug. Then add a squirt of soap through the filling hole and scrub.
ជំហាន 10 - Image 1

សម្ភារៈសម្រាប់ជំហាននេះ៖

បំពង់បាញ់ទឹកសួនច្បារបំពង់បាញ់ទឹកសួនច្បារ1 ដុំ
ទឹកទឹក1 ដុំ
សាប៊ូកាស្ទីល (រាវ)សាប៊ូកាស្ទីល (រាវ)1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ក្អមវាស់ក្អមវាស់
នាឡិកាបញ្ឈប់នាឡិកាបញ្ឈប់
ជញ្ជីងវាស់ឌីជីថល ៦ អ៊ីញជញ្ជីងវាស់ឌីជីថល ៦ អ៊ីញ
11

A brush that floods, starves or leaks

Tank-headed self-feeding brush troubleshooting.

Flow

Loading...
12

History and honest limits

**Ernest N. Broderick** of Indianapolis filed US 639,348 on 6 February 1899; it is dated 19 December 1899. Rubber or leather strips seal the tank to the brush-top. Two hollow adjustable joints, ground to fit and clamped by a bolt, let the handle be set at any angle, for floors, walls, windows or dusting high furniture; with compressed air instead of water it blows dust away, and a mop or duster may replace the brush. **Honest limits.** Our handle is fixed; his joints are not built here. The notebook gives open area, not flow through a real hole. Your flows are the result.

សម្ភារៈ

15

ឧបករណ៍ចាំបាច់

16

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...