កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Silver Solder of Silver and Red Copper With a Burnt Wine-Stone Flux (Theophilus, 12th Century)
Forge

បង្កើតដោយ

Forge

14. វិច្ឆិកា 2026NO
10
0
0
0
0

Silver Solder of Silver and Red Copper With a Burnt Wine-Stone Flux (Theophilus, 12th Century)

How Theophilus soldered silver in the 12th century: an alloy of two parts pure silver and a third part red copper, rasped to filings, laid on a joint painted with a flux of burnt wine-stone (tartar) ground with water and salt, and flowed in the coals with a long gentle blast.
មធ្យម
About half a day

ការណែនាំ

1

The alloy

កំពុងផ្ទុកសៀវភៅ Jupyter…
2

Read De Diversis Artibus, Book III

"Weigh two parts of pure silver, and a third (part) of red copper, and mix and finely rasp into a clean vessel."
3

Make the solder

Weigh two parts of pure silver and a third part of red copper, melt them together, and rasp the alloy finely into a clean vessel; keep the filings in a quill.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ប្រាក់សុទ្ធប្រាក់សុទ្ធ1 ដុំ
ស្ពាន់ក្រហមស្ពាន់ក្រហម1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ជញ្ជីងចានពីរជញ្ជីងចានពីរ
ឆ្នាំងរំលាយលោហៈឆ្នាំងរំលាយលោហៈ
ដង្កាប់ឆ្នាំងរំលាយដង្កាប់ឆ្នាំងរំលាយ
ឡជាងដែកឡជាងដែក
ដង្កូវផ្លុំខ្យល់ដង្កូវផ្លុំខ្យល់
រំហែកគ្រើមរំហែកគ្រើម
ប៊ិចរោមស្លាបប៊ិចរោមស្លាប
4

Make the flux

Take wine-stone from a vessel in which good wine has stood a long time, tie pieces in a cloth and put it in the fire until no more vapour comes from it. When cool, blow off the cloth ash and grind the burnt stone in a copper vessel with a round mallet, mixing in water and salt until it is as thick as lees.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ថ្មស្រាទំពាំងបាយជូរឆៅថ្មស្រាទំពាំងបាយជូរឆៅ1 ដុំ
ក្រណាត់កប្បាសក្រណាត់កប្បាស1 ដុំ
អំបិលអំបិល1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ធុង ២០ លីត្រធុង ២០ លីត្រ
ញញួរឈើញញួរឈើ
5

Solder

With a thin piece of wood paint the flux round the joint inside and out, shake the filed solder over it with a small iron, and dry it. Paint more flux on, more thickly than before, put the work in the fire, cover it with coals and blow gently with a long breath until the solder has melted. Take it out, let it cool slightly and wash it. If the joint is not firm, do it again. Then file and scrape it smooth.

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ដង្កូវផ្លុំខ្យល់ដង្កូវផ្លុំខ្យល់
ដង្កាប់ឆ្នាំងរំលាយដង្កាប់ឆ្នាំងរំលាយ
ដែកឆាប (ដែកឆាបដៃ)ដែកឆាប (ដែកឆាបដៃ)
6

Troubleshooting

Soldering troubleshooting.

Flow

Loading...
7

History and honest limits

From Theophilus, **De Diversis Artibus**, Book III, chapter XXXI, translated by Robert Hendrie (1847) (checked on the archive.org scan essayuponvarious00hend, pp. 241-243). "A third (part)" can be read two ways; both are shown. Melting the alloy before rasping, the tools and the diagram are ours.

សម្ភារៈ

5

ឧបករណ៍ចាំបាច់

10

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...