សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Tuyere Iron: a Slotted Grate Cast in Grey Iron
Forge

បង្កើតដោយ

Forge

18. តុលា 2026NO
22
0
0
0
0

Tuyere Iron: a Slotted Grate Cast in Grey Iron

The tuyere is the opening in the bottom of the forge fire through which the blast is blown. Bacon (1919): its openings must let the blast through easily while keeping cinders from dropping into the blast pipe, and there should be a way to open the pipe below and clear out the cinders that still get through. This one is a slotted grate over a socket for the blast pipe, cast in grey iron. The design and sizes are ours. The picture: our drawing.
កម្រិតខ្ពស់
2 days

ការណែនាំ

1

Make the pattern

From pine, make a pattern of a square plate about 15 cm across and 2 cm thick with four or five narrow slots, and a short round socket under its centre to take the blast pipe. Taper every side slightly so it draws from the sand.

ឧបករណ៍ដែលត្រូវការ៖

ក្តារឈើស្រល់ក្តារឈើស្រល់
រណារកាត់ខ្សែកោងរណារកាត់ខ្សែកោង
ឈុតដែកឆូតឈើឈុតដែកឆូតឈើ
កាវឈើកាវឈើ
ជញ្ជីងវាស់ឌីជីថល ៦ អ៊ីញជញ្ជីងវាស់ឌីជីថល ៦ អ៊ីញ
2

Ram the mould

Ram the pattern up in casting sand in the flask, draw it out, and cut a sprue and a runner to the cavity.

ឧបករណ៍ដែលត្រូវការ៖

ខ្សាច់ចាក់ពុម្ពខ្សាច់ចាក់ពុម្ព
ប្រអប់ពុម្ពចាក់ប្រអប់ពុម្ពចាក់
ប៉ែលដៃប៉ែលដៃ
3

Melt the iron

Melting pig iron in the cupola and tapping it into the ladle.
4

Pour

Pour the molten grey iron from the ladle into the sprue in one steady stream until the mould is full; about 4 kg with the sprue (our estimate). Let it cool in the sand.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដុំដែកឆៅដុំដែកឆៅ4 គក

ឧបករណ៍ដែលត្រូវការ៖

វែកចាក់លោហៈរលាយវែកចាក់លោហៈរលាយ
ប្រអប់ពុម្ពចាក់ប្រអប់ពុម្ពចាក់
ស្រោមដៃផ្សារស្រោមដៃផ្សារ
អាវការពារស្បែកអាវការពារស្បែក
ខែលការពារមុខខែលការពារមុខ
5

Clean up

Shake out the casting, cut off the sprue, grind the fins and brush off the sand. Check that every slot is clear.

ឧបករណ៍ដែលត្រូវការ៖

ម៉ាស៊ីនកិនមុំម៉ាស៊ីនកិនមុំ
សំណុំច្រាសលួសសំណុំច្រាសលួស
ស្រោមដៃផ្សារស្រោមដៃផ្សារ
ខែលការពារមុខខែលការពារមុខ
6

Set it in the forge

Set it in the hearth with the blast pipe in its socket and a way to open the pipe below for clearing cinders. Richardson's forge had its tuyere iron four inches below the hearth surface.

ឧបករណ៍ដែលត្រូវការ៖

ជញ្ជីងវាស់ឌីជីថល ៦ អ៊ីញជញ្ជីងវាស់ឌីជីថល ៦ អ៊ីញ

សម្ភារៈ

1
  • កន្លែងទុក

ឧបករណ៍ចាំបាច់

14

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...