សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Twin-Plunger Air-Chamber Churn: Two Plungers Throw the Cream Through a Middle Chamber
Emma

បង្កើតដោយ

Emma

6. តុលា 2026SE
3
0
0
0
0

Twin-Plunger Air-Chamber Churn: Two Plungers Throw the Cream Through a Middle Chamber

Andrews made the cream do the travelling, back and forth through a middle chamber. John Andrews of Middlesex County, Massachusetts, received US 7,298, dated 23 April 1850, for a churn box divided by two vertical partitions into three apartments, with a series of holes "at or near its bottom" in each partition, "unprovided with valves." Each outer chamber has a plunger on a rod jointed to a brake, "one of the said plungers being elevated while the other is being depressed," so the cream is thrown "back and forth in several streams through the air chamber." Holes near the partitions' tops let air in under each rising plunger. This rung works out the streams, then prints the partitions and plungers, builds the box and brake, and makes butter.
មធ្យម
About 5 hours, plus printing

ការណែនាំ

1

The streams

កំពុងផ្ទុកសៀវភៅ Jupyter…
2

Two dashers worked oppositely by one lever before it

The embedded blueprint works two dashers in one churn from a lever. Andrews puts each plunger in its own chamber so the cream must flow between them.
3

Read US 7,298

"Through each of the partitions a, b, and near the upper part thereof, I make one or more holes d, d, d, &c., as seen in Figs. 2 and 3, they being so arranged that the plunger F or F', during its upward stroke, shall pass partially or wholly above them, and in order to allow air to rush through said hole or holes and into the space directly under the plunger. The descent of the plunger forces such air into and through the cream."
4

Print the parts

Print two partitions (/uploads/blueprints/twin-plunger-air-chamber-churn-partition.stl) with their foot holes and air holes, two plungers (/uploads/blueprints/twin-plunger-air-chamber-churn-plunger.stl) and the brake hub (/uploads/blueprints/twin-plunger-air-chamber-churn-brake-hub.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

សម្ភារៈសម្រាប់ជំហាននេះ៖

សរសៃ PETGសរសៃ PETG1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ម៉ាស៊ីនបោះពុម្ព 3D ប្រើខ្សែ (FDM)ម៉ាស៊ីនបោះពុម្ព 3D ប្រើខ្សែ (FDM)
5

The box

Take a food-safe box about 230 × 120 × 160 mm. Glue the two partitions across it in silicone, dividing it into three equal chambers.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ធុងស្តុកកម្រិតម្ហូបអាហារធុងស្តុកកម្រិតម្ហូបអាហារ1 ដុំ
សារធាតុបិទស៊ីលីកូនសារធាតុបិទស៊ីលីកូន1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ឧបករណ៍ចាប់ឧបករណ៍ចាប់
ខ្សែវាស់ខ្សែវាស់
6

Plungers and brake

Glue a 12 mm hardwood dowel rod in each plunger. Screw two pine standards to the box's middle, pass a dowel through them as the rocker shaft, and fix a pine brake across it with the hub. Join each rod to an end of the brake on a loose screw, so one plunger rises as the other falls.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដែកគោលឈើរឹងដែកគោលឈើរឹង1 ដុំ
ក្តារឈើស្រល់ក្តារឈើស្រល់1 ដុំ
វីសម៉ាស៊ីនវីសម៉ាស៊ីន1 ដុំ
ខ្ចៅប្រាំមួយជ្រុងខ្ចៅប្រាំមួយជ្រុង1 ដុំ
កាវឈើកាវឈើ1 ដុំ
វីសឈើ #8 × ១ អ៊ីញវីសឈើ #8 × ១ អ៊ីញ1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

រណារដៃរណារដៃ
ស្វានឥតខ្សែស្វានឥតខ្សែ
សំណុំក្បាលខួងសំណុំក្បាលខួង
ឈុតទួណឺវីសឈុតទួណឺវីស
7

The patent drawing

US 7,298 drawing sheet, public domain (expired patent).
ជំហាន 7 - Image 1
8

Rock the brake and make butter

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres, below the top holes. Rock the brake steadily up and down; time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្រែមខាប់ក្រែមខាប់1500 មល
អំបិលសមុទ្រគ្រើមអំបិលសមុទ្រគ្រើម1 ដុំ
ទឹកទឹក1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ទែម៉ូម៉ែត្រមានចុងដោតទុកទែម៉ូម៉ែត្រមានចុងដោតទុក
នាឡិកាបញ្ឈប់នាឡិកាបញ្ឈប់
ជញ្ជីងឌីជីថលផ្ទះបាយជញ្ជីងឌីជីថលផ្ទះបាយ
ចានលាយធំដែកអ៊ីណុកចានលាយធំដែកអ៊ីណុក
9

Plungers that stick, cream over the top

Twin-plunger air-chamber churn troubleshooting.

Flow

Loading...
10

History and honest limits

**John Andrews** of Middlesex County, Massachusetts, received US 7,298, dated 23 April 1850. He wrote that the streams "so intermingle air with the lacteal matter as to very quickly oxygenate and cause a separation"; that is his account. He claimed the combination of the external chambers, their plungers and passages with the middle or air chamber, and the air-entering passages d. **Honest limits.** A food-safe box and printed parts stand in for his wooden box and plungers. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.

សម្ភារៈ

12

ឧបករណ៍ចាំបាច់

11

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...