សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Two-Current Separator Rocking Churn: An Oval Cistern Split Round a Separator, the Currents Collide at Each Tip
YourGrandma

បង្កើតដោយ

YourGrandma

7. តុលា 2026IS
10
0
0
0
0

Two-Current Separator Rocking Churn: An Oval Cistern Split Round a Separator, the Currents Collide at Each Tip

Daniel E. True of Lake Village, New Hampshire, received US 18,165, dated 8 September 1857, for a rocking churn whose oval cistern has a "separator" of the same shape in its middle, so the cream flows in two currents that "come in direct collision from opposite directions, at each tip." This rung prints the cistern and the separator lid, builds the swing seat and makes butter.
ចាប់ផ្តើម
About 3 hours, plus printing

ការណែនាំ

1

His sizes at one third

កំពុងផ្ទុកសៀវភៅ Jupyter…
2

A rocking churn he names

True names McLaughlin's and Enoch Thomas's patents and does not claim their grates; he claims the separator.
3

Read US 18,165

"The operation being accomplished by oscillating the swing seat C, which gives to the cream cistern a successive tip motion, Fig. 1, red lines, thereby causing the cream to flow rapidly, being divided by the separator, into two separate currents in its passage, which come in contact at their terminus, alternately, whereby the cream receives a violent and peculiar action which causes a speedy union of the particles of butter into one mass."
4

Print the parts

Print the oval cistern (/uploads/blueprints/two-current-separator-rocking-churn-cistern.stl) and the lid with its separator (/uploads/blueprints/two-current-separator-rocking-churn-separator-lid.stl). The cistern needs a bed at least 210 mm long. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

សម្ភារៈសម្រាប់ជំហាននេះ៖

សរសៃ PETGសរសៃ PETG1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ម៉ាស៊ីនបោះពុម្ព 3D ប្រើខ្សែ (FDM)ម៉ាស៊ីនបោះពុម្ព 3D ប្រើខ្សែ (FDM)
5

Frame and swing seat

Build a pine frame about 220 mm high and hang a pine seat between its uprights on a 10 mm rod, with two side strips that enter the cistern's guides. Hang a steel rod from the seat's middle with a stack of nuts as the pendulum weight.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្តារឈើស្រល់ក្តារឈើស្រល់1 ដុំ
ដែកទន់ដុំមូលដែកទន់ដុំមូល1 ដុំ
ខ្ចៅប្រាំមួយជ្រុងខ្ចៅប្រាំមួយជ្រុង6 ដុំ
វីសឈើ #8 × ១ អ៊ីញវីសឈើ #8 × ១ អ៊ីញ1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

រណារដៃរណារដៃ
ស្វានឥតខ្សែស្វានឥតខ្សែ
សំណុំក្បាលខួងសំណុំក្បាលខួង
ឈុតទួណឺវីសឈុតទួណឺវីស
6

Corks

Plug the lid's two ventilators and the cistern's outlet with corks.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ឆ្នុកកូកឆ្នុកកូក3 ដុំ
7

The patent drawing

US 18,165 drawing sheet, public domain (expired patent).
ជំហាន 7 - Image 1
8

Rock and churn

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 600 ml and fit the lid with its separator. Rock the seat end to end steadily; time until the butter comes. Draw off the buttermilk at the outlet. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្រែមខាប់ក្រែមខាប់600 មល
អំបិលសមុទ្រគ្រើមអំបិលសមុទ្រគ្រើម1 ដុំ
ទឹកទឹក1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ទែម៉ូម៉ែត្រមានចុងដោតទុកទែម៉ូម៉ែត្រមានចុងដោតទុក
នាឡិកាបញ្ឈប់នាឡិកាបញ្ឈប់
ជញ្ជីងឌីជីថលផ្ទះបាយជញ្ជីងឌីជីថលផ្ទះបាយ
ចានលាយធំដែកអ៊ីណុកចានលាយធំដែកអ៊ីណុក
9

Troubleshooting

Two-current churn troubleshooting.

Flow

Loading...
10

History and honest limits

**Daniel E. True** of Lake Village, Belknap County, New Hampshire, US 18,165, 8 September 1857. His frame was 2 feet high. He wrote that grate and perforated dashers were not new, naming Enoch Thomas's and John McLaughlin's patents, and claimed the separator in rocking churns. A printed cistern at one third of his size, pine and nuts stand in for his. FDM prints hold food in their layer lines, so wash well and replace when worn.

សម្ភារៈ

9

ឧបករណ៍ចាំបាច់

9

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...