협업
예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블

Barium Ferrite Disc Magnet: 0.4 mol BaCO3 to 3.2 mol Iron Oxide, 1330 °C (Went, Philips 1956, Ex. 5)
A barium ferrite with 0.4 mol barium carbonate to 3.2 mol iron oxide, made as in Example 4 and passed through a 1330 °C furnace in 20 minutes. Went's rod held 1,220 gauss with a coercive force of 1,900 oersted.
Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 5. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
고급
2 days
안내
1
1
Weigh barium carbonate and iron oxide
Weigh barium carbonate and iron oxide
Weigh 79.4 g barium carbonate (0.4 mol) and 516.4 g ferric oxide (3.2 mol). Barium carbonate is poisonous if swallowed: gloves and a dust respirator.
이 단계의 재료:
탄산바륨(독중석)79.4 g
산화제이철516.4 g필요한 도구:
접시 저울
고무장갑
P100 방진 마스크2
2
Mill with alcohol 15.5 hours, dry and sieve
Mill with alcohol 15.5 hours, dry and sieve
As in Example 4: grind the mixture with alcohol in a ball mill for 15.5 hours, then dry it and sieve it.
필요한 도구:
철 볼 밀
에탄올 - 실험실 등급, 95 %
건조 가마
어레미3
3
Knead with a binder and form
Knead with a binder and form
Mix 300 g of the powder with a binder such as polyvinyl alcohol (Went names it or nitrocellulose) into a kneadable mass. The patent extrudes rods about 3 mm across; ours: press discs at 1.5 tonnes per cm², as in its other examples. Dry them in air for about 24 hours.
필요한 도구:
폴리비닐알코올 분말
유압 프레스
원판 압축 금형
건조 가마4
4
Pass through a 1330 °C zone in 20 minutes
Pass through a 1330 °C zone in 20 minutes
Sinter in air at 1330 °C by passing the pieces through a 10 cm hot zone at 5 mm per minute: 20 minutes in the heat.
필요한 도구:
관상로
내열 장갑5
5
Magnetise the discs
Magnetise the discs
The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.
필요한 도구:
전자석
나침반이 블루프린트로 만드는 것
관련 블루프린트
이 블루프린트들은 지식을 공유합니다 — 기술, 재료 또는 원리
CC0 퍼블릭 도메인
이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.
제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.

