예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
Blumlein Stereo
Penny

작성자

Penny

26. 8월 2026DK
0
0
0
0
0

Blumlein Stereo

A single microphone captures how loud a sound is, and nothing whatever about where it came from. Alan Blumlein's 1931 patent set out the entire theory and practice of two-channel stereo — how to capture directional information with two coincident microphones, how to encode two channels in one groove using a stylus that moves in two perpendicular directions at once, and how the resulting signals recreate a spatial image between two loudspeakers. He filed it as one of 128 claims in a single patent, at the age of 28, and the system EMI eventually shipped decades later was essentially his. His crossed figure-of-eight technique is still called a Blumlein pair and is still used.
고급
4 hours 30 minutes

안내

1

Set up a coincident crossed pair

Two figure-of-eight microphones, same point in space, 90 degrees apart.

  1. Mount two figure-of-eight microphones with their capsules as close together as physically possible, one directly above the other.
  2. Angle them at 90 degrees to each other, so each points 45 degrees off the centre line.
  3. Feed one to the left channel and one to the right.
  4. Walk a sound source in an arc in front of them and listen on headphones.

Coincident is the crucial word. Because both capsules occupy nearly the same point, sound arrives at both at the same TIME — so the only difference between the channels is level, determined by each microphone's pattern. That gives a stereo image that survives being summed to mono, which spaced microphones do not. Blumlein understood this in 1931, before anyone had heard stereo reproduction.

Use the ribbon microphones from earlier in this batch. Their native figure-of-eight pattern is what makes this technique possible — it is not a coincidence that the ribbon and stereo arrive within a decade of each other.

이 단계의 재료:

Audio Cable TRRS - 45cm (pigtail)Audio Cable TRRS - 45cm (pigtail)1
Audio Jack - 1/4 Stereo (vertical)Audio Jack - 1/4 Stereo (vertical)1

필요한 도구:

Digital Oscilloscope (100MHz, 2-Channel)Digital Oscilloscope (100MHz, 2-Channel)
Combination Square (12-inch)Combination Square (12-inch)
Audio Interface (USB-C, 2-Channel)Audio Interface (USB-C, 2-Channel)
2

Measure how direction becomes level difference

Turn the effect into numbers so the mechanism is unmistakable.

  1. Place a tone source directly ahead and record both channel levels — they should be equal.
  2. Move it 30 degrees left and record both again.
  3. Continue in steps to 90 degrees left, then repeat to the right.
  4. Tabulate left level, right level, and their difference against angle.
Straight ahead the levels match, so the image sits centrally. Off to one side, one microphone's pattern favours the source while the other's rejects it, and the level difference grows steadily with angle. Your ear interprets that inter-channel level difference as direction — which is the entire mechanism of stereo. No time delays, no phase tricks, just two numbers whose ratio encodes an angle.

이 단계의 재료:

Graph PaperGraph Paper1 pad

필요한 도구:

DDS Signal Generator (1Hz-65MHz)DDS Signal Generator (1Hz-65MHz)
Digital Oscilloscope (100MHz, 2-Channel)Digital Oscilloscope (100MHz, 2-Channel)
Digital Multimeter (Lab Grade)Digital Multimeter (Lab Grade)
Combination Square (12-inch)Combination Square (12-inch)
3

Encode two channels in one groove

The stylus must move in two independent directions at once — this is Blumlein's other great idea.

  1. Model the groove as a V with two walls at 45 degrees to the surface.
  2. Let one channel move the stylus along one wall's normal, and the other along the other wall's.
  3. Confirm that the two directions are perpendicular, so neither channel affects the other.
  4. Work out what happens when both channels carry the same signal, and when they carry opposite signals.

Identical signals move the stylus purely laterally; opposite signals move it purely vertically. That is the beautiful part — a stereo record played with a mono lateral pickup reproduces the sum of the two channels correctly, so the format is backward compatible with every mono player already in existence. Blumlein designed that compatibility in from the start.

This 45/45 system is what all stereo records use. The alternative proposals of the 1950s — one channel lateral, one vertical — were rejected precisely because they lacked this symmetry, and treated the two channels unequally.

이 단계의 재료:

Acrylic Sheet (Clear, 1/4 inch, 12x12)Acrylic Sheet (Clear, 1/4 inch, 12x12)1
Graph PaperGraph Paper1 pad

필요한 도구:

Digital Caliper 6-InchDigital Caliper 6-Inch
Combination Square (12-inch)Combination Square (12-inch)
Digital Oscilloscope (100MHz, 2-Channel)Digital Oscilloscope (100MHz, 2-Channel)
4

Test the mono compatibility and the phase trap

Stereo that collapses badly to mono was a real commercial problem, so check it.

  1. Record a source with your Blumlein pair and listen in stereo.
  2. Sum the two channels electrically and listen in mono — the image collapses to the centre but nothing disappears.
  3. Now deliberately reverse the polarity of one channel and sum again.
  4. Listen to what happens to the centre.
With one channel inverted, anything common to both channels cancels — and that is usually the lead vocal and the bass, sitting in the centre. Broadcast engineers checked mono compatibility obsessively for decades because most listeners had mono radios, and a record that sounded good in stereo and hollow in mono was commercially damaged. Blumlein's coincident technique is inherently well behaved here; spaced microphone techniques are not.

필요한 도구:

Digital Oscilloscope (100MHz, 2-Channel)Digital Oscilloscope (100MHz, 2-Channel)
Audio Interface (USB-C, 2-Channel)Audio Interface (USB-C, 2-Channel)
Digital Multimeter (Lab Grade)Digital Multimeter (Lab Grade)
5

One patent, an entire format, and history

Alan Dower Blumlein filed his stereo patent in 1931 at EMI, aged 28. Its 128 claims cover the crossed-pair recording technique, the 45/45 groove, stereo film sound, and the matrix arithmetic for converting between left/right and sum/difference representations. He made demonstration films with stereo soundtracks in 1935 that still exist. He was killed in 1942 testing airborne radar, aged 38, having also made fundamental contributions to television and radar.

The sum-and-difference idea in his patent outlived even the format. Encoding two channels as their sum and their difference rather than as left and right is exactly how FM stereo radio works — the sum goes out as the ordinary mono signal that any receiver can use, and the difference is carried separately for receivers that can decode it. The same trick reappears in television colour encoding and in audio compression. Blumlein was working out the general theory, not just a record format.

Why it took twenty-five years to ship. The patent was decades ahead of the industry: stereo discs needed better pickup cartridges, better vinyl, and consumers with two loudspeakers. Commercial stereo records arrived in 1958, twenty-seven years after the patent and sixteen years after Blumlein's death, using essentially his system unchanged.

Its honest limits: a coincident pair gives excellent image stability and a somewhat narrower, drier sound than spaced microphones; the figure-of-eight patterns pick up the room behind as much as the front, so it demands a good acoustic; and it captures no time-of-arrival cues, which some listeners find makes the image less enveloping. Engineers choose between coincident and spaced techniques exactly on those grounds.

재료

4

필요 도구

6
예상 총액
₩54

관련 블루프린트

이 블루프린트들은 지식을 공유합니다 — 기술, 재료 또는 원리

CC0 퍼블릭 도메인

이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.

제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.

토론

(0)

로그인 하여 토론에 참여하세요

댓글 로딩 중...