예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
Gravity: Measuring the Sugar Before and After Tells You Everything
Alchometer

작성자

Alchometer

24. 9월 2026GB
23
0
0
0
0

Gravity: Measuring the Sugar Before and After Tells You Everything

Sugar dissolved in water makes it denser. Yeast converts that sugar into alcohol, which is LESS dense than water. So measuring the density before and after fermentation tells you how much sugar was consumed — and therefore how much alcohol was made. That is what a hydrometer does, and it turns brewing from guesswork into measurement. Two readings and a subtraction give the strength, and the same two readings tell you whether fermentation finished or stalled. Which makes it the one instrument that is genuinely not optional. A brewer without gravity readings does not know how strong the drink is, whether it is safe to bottle, or what went wrong when something does.
초급
2 hours

안내

1

Take the reading properly

Float the hydrometer in a tall sample jar, not in the fermenter. Spin it gently as you let go so the bubbles clinging to it release — bubbles lift it and give a reading that is too low. Read at the bottom of the meniscus, at eye level, exactly as with any volumetric glassware. And take the sample AT the calibration temperature or correct for it: most hydrometers are calibrated at 20 °C, and a hot sample reads low because the liquid has expanded. Never pour the sample back. It has been exposed, it has been in an un-sanitised jar, and returning it risks the whole batch for a few millilitres. Taste it instead — that sample is also your best early warning of an off-flavour.

이 단계의 재료:

물물1 리터

필요한 도구:

양조용 비중계와 시험 실린더양조용 비중계와 시험 실린더
양조용 온도계와 비중계 세트양조용 온도계와 비중계 세트
즉시 판독 온도계즉시 판독 온도계
2

From two readings to alcohol

Jupyter 노트북 불러오는 중…

이 단계의 재료:

물물1 리터

필요한 도구:

양조용 비중계와 시험 실린더양조용 비중계와 시험 실린더
데스크톱 컴퓨터데스크톱 컴퓨터
계산기계산기
3

A refractometer is fast and lies after fermentation starts

A refractometer needs two drops instead of a full sample jar, works on hot wort, and gives a reading in seconds. For pre-fermentation gravity it is far more convenient than a hydrometer. But alcohol bends light differently from sugar, so once fermentation has started the reading is systematically wrong. Correction formulae exist and they need the original gravity as an input, which means a refractometer alone cannot give a final gravity. That is a textbook systematic error: repeatable, in one direction, invisible from the reading itself. Use the refractometer for the start and the hydrometer for the end, which is each instrument used where it does not lie.

필요한 도구:

브릭스 굴절계(0-32 %)브릭스 굴절계(0-32 %)
양조용 비중계와 시험 실린더양조용 비중계와 시험 실린더
4

Write every reading down with its date

A single gravity reading tells you very little. Two readings three days apart tell you whether fermentation is finished, and a series tells you how fast it went and whether it slowed unexpectedly. So log OG on brew day, then a reading every few days once the visible activity slows. The criterion for done is two or three identical readings over several days — the dry-to-constant-mass loop from the chemistry batch, applied to a fermenter. Record the temperature with every reading, and the yeast used. Those three columns together turn a brewery into something that improves rather than one that produces a different drink each time.

필요한 도구:

양조용 비중계와 시험 실린더양조용 비중계와 시험 실린더
즉시 판독 온도계즉시 판독 온도계

재료

1
  • 2 리터
    플레이스홀더

필요 도구

6

CC0 퍼블릭 도메인

이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.

제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.

토론

(0)

로그인 하여 토론에 참여하세요

댓글 로딩 중...