예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
Nitrile Rubber (Buna-N)
Martin

작성자

Martin

22. 9월 2026NO
0
0
0
0
0

Nitrile Rubber (Buna-N)

At IG Farben in 1930 Erich Konrad and Eduard Tschunkur copolymerised butadiene with acrylonitrile. The nitrile group makes the chain polar, so oil and petrol - which are not - stay out. Sold as Buna N, nitrile rubber became the standard material for oil seals, fuel hoses and, much later, disposable gloves. **US 1,973,000**, "Rubber like masses from butadiene hydrocarbons and polymerizable nitriles", Konrad and Tschunkur, assigned to IG Farbenindustrie, filed 20. April 1931, granted 11. September 1934. It requires the butadiene to be more than about 60 % by weight of the mix. **You build the part nitrile made universal: an O-ring seal.** Turn two plugs with sized grooves, close a clear pipe with them, and leave it under water overnight.
중급
3 hours plus an overnight soak

안내

1

The plug

One turned acetal plug: a flange that stops against the pipe end, a spigot that fits the bore, and a groove carrying the O-ring.
디자인 파일BLENDCC0 - Free
2

Measure and choose

Cut 150 mm of clear PVC pipe and deburr both ends. Measure the bore at three angles and average. Pick a nitrile O-ring about 3 mm thick whose inside diameter is a little under bore minus 5 mm.

이 단계의 재료:

투명 PVC 파이프투명 PVC 파이프1
오링 모음 키트오링 모음 키트1 키트

필요한 도구:

쇠톱(핵소)쇠톱(핵소)
사포사포
디지털 캘리퍼스 6인치디지털 캘리퍼스 6인치
3

Size the groove

Jupyter 노트북 불러오는 중…
4

Turn the spigot

Chuck acetal rod. Face it. Turn 12 mm of length to the bore minus 0.1 mm, leaving a 5 mm flange at full pipe outside diameter behind it.

이 단계의 재료:

델린/아세탈 봉델린/아세탈 봉1

필요한 도구:

금속 선반금속 선반
선반 공구 세트 (HSS)선반 공구 세트 (HSS)
디지털 캘리퍼스 6인치디지털 캘리퍼스 6인치
투명 보안경투명 보안경
5

Cut the groove

3 mm from the spigot's end, plunge the parting tool to the root diameter from the notebook, then widen to 4.0 mm. Check the root with the caliper. Break the sharp edges.

필요한 도구:

절단 바이트절단 바이트
금속 선반금속 선반
디지털 캘리퍼스 6인치디지털 캘리퍼스 6인치
6

Part off, make the second

Part off behind the flange. Make a second identical plug.

이 단계의 재료:

델린/아세탈 봉델린/아세탈 봉1

필요한 도구:

절단 바이트절단 바이트
금속 선반금속 선반
7

Grease and fit

Wipe a thin film of petroleum jelly on each O-ring and roll it into its groove without twisting. Put a folded dry paper towel in the pipe and press both plugs home.

이 단계의 재료:

바셀린바셀린2 g
종이 타월종이 타월1
8

Overnight under water

Weigh the capsule down in a bucket of water for 12 hours. Dry it outside, open it, and check the towel. Any damp spot shows which end leaked.

필요한 도구:

양동이양동이
9

History & Context

**What the patent specifies:** a butadiene hydrocarbon (over about 60 % by weight) polymerised with a polymerisable nitrile, by heating or in emulsion. **Modern build (derived):** commercial NBR O-rings in an acetal gland. Wartime Germany needed a rubber that fuel could not ruin, and nitrile answered it. More nitrile in the chain means more oil resistance and less flexibility in the cold. Its limits: ozone and sunlight crack it, and it swells in brake fluid and many solvents.

재료

5

필요 도구

8

디자인 파일

1

관련 블루프린트

이 블루프린트들은 지식을 공유합니다 — 기술, 재료 또는 원리

CC0 퍼블릭 도메인

이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.

제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.

토론

(0)

로그인 하여 토론에 참여하세요

댓글 로딩 중...