예술

뷰티 및 웰니스

공예

문화 및 역사

엔터테인먼트

환경

음식 및 음료

역공학

과학

스포츠

기술

웨어러블

Oak Boards and Blocks, Milled and Air-Dried

작성자

Woody

11. 10월 2026

Oak Boards and Blocks, Milled and Air-Dried

The same chainsaw mill that cuts pine boards cuts oak, but oak dries slowly and checks if it dries too fast. The old rule of a year per 25 mm of thickness is close for oak. Thin boards are cut for joinery; one thick slab is kept for blocks. Compared with pine: a slower cut, a heavier log, and a drying time measured in years, not months.

중급

1 day milling, 1–3 years drying

안내

The milling method

Setting up the mill and the guide board, as for pine.

Mill the boards

Mill a straight oak log into boards a few millimetres over 25 mm, and one slab 80 mm thick for blocks. Oak is harder: feed slower and keep the chain sharp.

이 단계의 재료:

활엽수 통나무(참나무, 단풍나무, 너도밤나무)1 개

나사못6 개

필요한 도구:

체인톱(전문 임업용)

체인톱 제재기

소나무 판재

무선 드릴

직각 자

수평계

안전모

귀 보호 덮개

가죽 작업 장갑

강철 앞심 안전화

Seal the ends at once

Coat both ends of every board and the slab with wax end sealer the same day.

이 단계의 재료:

마구리 막이 (파라핀 밀랍)0.5 리터

Sticker in the shade

Stack on a level base 30 cm off the ground, with 19 mm stickers every 30 cm, one above the other, in a shaded, airy place. Strong sun and wind make oak surfaces check.

이 단계의 재료:

굄목 (건조용 간격재)40 개

필요한 도구:

나무 팔레트

수평계

Cover and weight

Cover the top against rain, weight the stack, and leave the sides open.

필요한 도구:

방수 천막

How long to wait

Jupyter 노트북 불러오는 중…

Measure, then bring indoors

Read a board from the middle of the stack each season. Air drying stops at about 12–15 %; bring the boards indoors to settle at 6–8 % before furniture work.

필요한 도구: