예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
그린 퓨처
역공학
과학
스포츠
기술
웨어러블
Building a Reed Bundle Raft — Buoyant Watercraft from Wetland Plants
Woody

작성자

Woody

25. 5월 2026NO
11
0
0
1
0

Building a Reed Bundle Raft — Buoyant Watercraft from Wetland Plants

The reed bundle raft is one of the oldest watercraft designs, used by cultures worldwide wherever large reeds or bulrushes grow near water. The totora reed boats of Lake Titicaca, the papyrus boats of ancient Egypt, and the tule balsa rafts of Native California all use the same principle: bundles of dried reeds lashed tightly together contain enough trapped air to support a person's weight. Reeds are naturally buoyant because their stems are filled with a spongy aerenchyma tissue. A well-built reed raft can carry 200-400 kg depending on size. The craft is simple to build, requires no metal tools, and the materials grow abundantly in any wetland. The main limitation is lifespan — waterlogged reeds eventually lose buoyancy after 2-4 weeks of continuous use.
중급
4-6 hours

안내

1

Harvest Reeds

Harvest large quantities of bulrush, cattail, or tule reeds — each stalk should be 2+ metres long.

이 단계의 재료:

Dried ReedDried Reed100
2

Dry the Reeds

Spread the reeds on dry ground and let them dry for 1-2 weeks until they feel light and stiff.
3

Sort by Length

Sort dried reeds by length into matching groups.
4

Form the First Bundle

Form the first bundle: gather a tight armload of reeds (30-40cm diameter) and bind at 3-4 points along its length with strong cordage.

이 단계의 재료:

CordageCordage5
5

Taper Both Ends

Taper both ends of the bundle by using progressively shorter reeds at the outsides — this creates a pointed bow and stern.
6

Make a Second Bundle

Make a second identical bundle.
7

Lash the Bundles Together

Lash the two bundles side by side with cross-lashings every 30-40cm, pulling the bundles as tight as possible.
8

Check the Width

The raft should be wider than the paddler's hips (80-120cm total width).
9

Optional: Add a Deck Bundle

Optional: add a third smaller bundle on top between the two main bundles to create a raised deck.
10

Prepare a Paddle

Tie a paddle or pole before launching.
11

Test in Shallow Water

Test in shallow water first — the raft should sit with the top surface above waterline with the paddler aboard.
12

Store Out of Water

Keep the raft stored out of water when not in use to extend lifespan.

재료

2

연결된 블루프린트 재료

CC0 퍼블릭 도메인

이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.

제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.

토론

(0)

로그인 하여 토론에 참여하세요

댓글 로딩 중...