협업
예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블

Sodium Hydroxide Solution: Normal Caustic Soda, 40 g per Litre (Sutton, 1904)
The standard normal (1 M) caustic soda solution for titration: 40 g NaOH in each litre. Make it a little too strong, check it against normal acid, bring it to exact strength and keep it away from the air, which it takes carbon dioxide from.
Result: normal sodium hydroxide solution, its strength proved by titration.
Source: F. Sutton, A Systematic Handbook of Volumetric Analysis (1904), p. 48. Picture: that page of the book.
초급
Unknown
안내
1
1
Dissolve the caustic soda
Dissolve the caustic soda
Dissolve pure caustic soda in distilled water until the solution has a specific gravity of about 1.05, about 50 g to the litre: a little stronger than normal (40 g to the litre). Expose it to the air as little as possible.
이 단계의 재료:
수산화나트륨 — 실험실 등급1 about 50 g per litre
증류수1 solvent필요한 도구:
눈금 실린더2
2
Titrate and adjust
Titrate and adjust
Estimate its strength roughly with normal acid and methyl orange. Then titrate 50 ml of it exactly against normal acid and adjust it to exact normal strength. Methyl orange works cold even if the solution has taken up some carbon dioxide; with litmus or phenolphthalein, titrate boiling. Not given: the dilution, implied by the adjustment. Ours: hydrochloric acid as the normal acid; methyl orange as the pH indicator solution.
필요한 도구:
염산
pH 지시약 용액
뷰렛(유리)
피펫3
3
Store it
Store it
Once its strength is settled, keep it in a bottle that shuts out the air, or in full bottles with their glass stoppers lightly greased with vaseline.
필요한 도구:
유리병 (무색투명)
바셀린연결된 블루프린트 재료
이 블루프린트로 만드는 것
CC0 퍼블릭 도메인
이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.
제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.


