협업
예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
Type 304 Stainless Steel: Arc-Melted, AOD-Refined and Cast into Blooms and Slabs
Forge

작성자

Forge

17. 10월 2026NO
11
0
0
0
0

Type 304 Stainless Steel: Arc-Melted, AOD-Refined and Cast into Blooms and Slabs

Stainless steel is steel with at least 10.5 % chromium, which forms a thin protective oxide film; type 304 (18/8, 1912) adds nickel. Melt steel with ferrochrome and ferronickel in an electric arc furnace, take the carbon out with argon and oxygen in an AOD converter, and cast it continuously into blooms for bars and wire or slabs for sheet. The picture: our diagram of the route.
고급
Factory process

안내

1

Melt the charge

Melt steel together with ferrochrome and ferronickel in the electric arc furnace, aiming at about 18 % chromium and 8 % nickel.

이 단계의 재료:

강괴강괴1 개
페로크롬페로크롬1 as required
페로니켈페로니켈1 as required

필요한 도구:

전기 아크로전기 아크로
2

Refine in the AOD converter

Pour into a ladle and transfer to the AOD converter. Blow argon and oxygen through the melt to burn the carbon out as carbon monoxide, and adjust the composition by analysis.

필요한 도구:

주조용 국자주조용 국자
AOD 전로AOD 전로
아르곤아르곤
산소산소
3

Cast it continuously

Ladle, tundish, water-cooled mould, spray chamber and withdrawal rolls, as for billets.
4

Cast blooms or slabs

Cast blooms, about 25 × 25 cm, for bars and wire rod; or slabs, about 20 cm thick, for sheet. Cut to length with the torch.

필요한 도구:

턴디시턴디시
수랭 구리 주형수랭 구리 주형
지지 롤이 있는 스프레이 챔버지지 롤이 있는 스프레이 챔버
교정·인발 롤교정·인발 롤
산소 아세틸렌 절단 토치산소 아세틸렌 절단 토치
5

The 18/8 target

Jupyter 노트북 불러오는 중…

재료

3
  • 1 개
    플레이스홀더
  • 1 as required
    플레이스홀더
  • 1 as required
    플레이스홀더

필요 도구

10

CC0 퍼블릭 도메인

이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.

제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.

토론

(0)

로그인 하여 토론에 참여하세요

댓글 로딩 중...