예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블

The Forage Harvester: Chopping Green Crop to a Set Length
Silage is green crop — grass, maize, legumes — packed tight and left to ferment so it keeps through winter. It keeps only if it is chopped short and evenly enough to pack out the air. For decades the crop was cut and carted to a stationary silage cutter at the silo. The field forage harvester does the chopping in the field: it picks up or cuts the crop, feeds it between rollers into a cutterhead of knives, and blows the chop up a spout into a trailer.
Sir Charles Ross thought of joining a pick-up to an ensilage cutter and blower powered by an engine riding on the rig; Professor Floyd Duffee improved it; the Fox River Tractor Company tried a mower-type chopper in 1931 and sold a cutter-bar chopper from 1940, and in 1942 Gehl became the first to mass-produce forage harvesters.
This rung works out the length of cut, the flywheel's reserve and the spout speed, and builds a paper-strip model that shows the length of cut directly.
초급
About 3 hours
안내
1
1
Length of cut, flywheel reserve and spout speed
Length of cut, flywheel reserve and spout speed
Jupyter 노트북 불러오는 중…
2
2
Model the cut with a paper strip
Model the cut with a paper strip
No knives needed. Wind a 50 mm strip of kraft paper onto a spool driven by a geared DC motor, so the strip is pulled past a point at a steady speed — that is the feed rolls. Measure the feed speed with a rule and stopwatch.
Screw a plywood arm to the shaft of a second geared motor, with a felt marker at its tip that dabs the paper once a turn as it sweeps past — that is one knife. Measure its speed with the tachometer.
Run both and measure the spacing of the dabs: it is $v_f / (z n)$ with $z = 1$. Add a second marker on the opposite end of the arm ($z = 2$) and the spacing halves; slow the feed and it shrinks again. Every setting of a real harvester's length of cut is one of these two changes.
이 단계의 재료:
크라프트지 롤(갈색)1 개
감속기 달린 DC 모터2 개
합판1 개
기계 나사6 개
유성 매직2 개필요한 도구:
직류 전원 장치
디지털 회전 속도계
스톱워치
자
무선 드릴
글루건3
3
Where a pulled harvester gets its power
Where a pulled harvester gets its power
A tractor-drawn forage harvester is driven from the tractor's power take-off. The embedded blueprint covers the shaft, its universal joints and its dangers.
4
4
Chop coming out wrong
Chop coming out wrong
Forage harvester problems show in the trailer.
Flow
Loading...
5
5
History and honest limits
History and honest limits
**Sir Charles Ross** proposed joining a pick-up to an ensilage cutter and blower with its own engine; **Professor Floyd Duffee** improved the idea; the **Fox River Tractor Company** built an experimental chopper in 1931 and marketed a cutter-bar chopper from 1940; **Gehl** began mass production in 1942. Self-propelled harvesters with kernel processors now chop whole maize crops.
**Honest limits.** The theoretical length of cut assumes the crop is fed straight; in practice it varies. The flywheel figures are a simple solid-disc model. A cutterhead is lethal: it keeps turning long after the drive stops, and blockages must only be cleared with the engine off and the head stationary.
재료
5- 1 개플레이스홀더
- 부터₩34
- 1 개플레이스홀더
- 6 개플레이스홀더
- 2 개플레이스홀더
관련 블루프린트
이 블루프린트들은 지식을 공유합니다 — 기술, 재료 또는 원리

McCormick Reaper
Martin 작성
환경
38
0
0
0
0
0

The Power Take-Off: Sending the Tractor's Engine Back Down a Shaft
Martin 작성
역학
9
0
0
0
0
0

The Crank and the Flywheel: Smoothing One Bang in Two Turns
Martin 작성
역학
9
0
0
0
0
0

The Sirocco Fan: Many Shallow Forward-Curved Blades
Emma 작성
역학
8
0
0
0
0
0

Egyptian Grain Silo — Constructing a Beehive-Shaped Grain Silo
Emma 작성
석공
97
0
0
0
0
0
CC0 퍼블릭 도메인
이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.
제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.