예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
The Ring-Set Lemon Squeezer: A Bowl Held in Its Handle by a Screwed Ring
YourGrandma

작성자

YourGrandma

30. 9월 2026IS
39
0
0
0
0

The Ring-Set Lemon Squeezer: A Bowl Held in Its Handle by a Screwed Ring

A squeezer's bowl set loose in a wooden handle works free, and one fixed in for good cannot be taken out to clean or replace. James L. Jensen of Brooklyn, New York, received US 104,159, dated 14 June 1870, for "the best means of inserting a lemon-squeezer in its handles", "forming an annular flange on the cup, but below the top thereof, placing it upon the open shoulder of the handle, and detachably fastening thereon an independent annular ring flush with the top." The bowl's flange rests in a stepped recess cut in the handle's face; a wooden ring fits between the bowl's top and the recess wall and is held by screws. This rung works out what the ring's screws carry, then makes hinged hardwood handles with a tin bowl set in a stepped recess and held by a screwed ring, and squeezes lemons with it.
중급
About 4 hours

안내

1

The ring's screws

Jupyter 노트북 불러오는 중…
2

A hinged squeezer before it

The embedded blueprint sets a sprung button in one of two hinged levers. Jensen sets the bowl itself into the handle so it can be taken out.
3

Read US 104,159

"I make the bowls A with a horizontal flange, B, on the outside, near the top, and provide an annular recess in the face of the handles C, to which they are to be attached. This recess is deeper than the thickness of the rim B, and it is widened on the plane of the top of the said rim when resting in the bottom. In this widened part a ring of wood, D, is secured by screws E fitting snugly between the top of the cup and the wall of the recess, and upon the top of the rim B." "This arrangement makes a very simple, cheap, and efficient fastening, and is applicable for securing said cups into wood or metal for any other purpose."
4

Make the handles and set the bowl

**Bowl.** Cut the bottom 3 cm off a clean tin can and punch holes in its base. Solder a ring of tinplate round its outside 5 mm below its top as the flange B. **Handles.** Cut two hardwood handles, one with a round end for the bowl, and join them at the other end of that round with a butt hinge. In the lower handle's round end, cut a hole the bowl drops through, and round it a stepped recess: a shoulder for the flange to rest on, widened above it. **Ring.** Cut a hardwood ring that fits the widened part, between the bowl's top and the recess wall, and bears on the flange. Screw it down with three screws into the handle. **Press.** Screw a hardwood dome to the upper handle so it closes into the bowl. **Test.** Squeeze lemons over a glass. Then unscrew the ring, lift the bowl out, clean it and set it back.

이 단계의 재료:

양철통양철통1 개
양철판양철판1 개
무연 배관 땜납무연 배관 땜납1 개
용제용제1 개
경목 판재경목 판재1 개
경목 블록경목 블록1 개
문 경첩문 경첩1 개
나사못나사못8 개
레몬레몬2 개

필요한 도구:

판금 가위판금 가위
못못
망치망치
인두인두
손톱(핸드소)손톱(핸드소)
목공 끌 세트목공 끌 세트
무선 드릴무선 드릴
드릴 비트 세트드릴 비트 세트
거친 줄거친 줄
드라이버 세트드라이버 세트
부엌칼부엌칼
음료용 유리컵음료용 유리컵
가죽 작업 장갑가죽 작업 장갑
5

A bowl that rocks, leaks or will not come out

Ring-set lemon squeezer troubleshooting.

Flow

Loading...
6

History and honest limits

**James L. Jensen** of Brooklyn, Kings County, New York, received US 104,159, dated 14 June 1870. His handles C carried the recess into which the bowls were attached, and he held the fastening applicable for securing cups in wood or metal for other purposes. His claim is the annular flange below the cup's top, the open circular recess in the handle, and the independent annular ring detachably fastened. **Honest limits.** A tin can with a soldered flange stands in for his bowl. The notebook gives the most a screw could carry; its forces, lengths and screw counts are examples. Your squeezing and cleaning are the result.

재료

9
  • 플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 1 개
    플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 2 개
    플레이스홀더

필요 도구

13
  • 플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 2 vendors sell this, none ship to you yet
    플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 1 vendor sell this, none ship to you yet
    플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 플레이스홀더

이 블루프린트로 만드는 것

CC0 퍼블릭 도메인

이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.

제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.

토론

(0)

로그인 하여 토론에 참여하세요

댓글 로딩 중...