예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
The Spring-Fork Egg Holder: Notches of Different Depths Set the Jaws to the Egg
An egg cup fits one size of egg, and a hot potato or egg must still be lifted to it.
Anthony Iske of Lancaster, Pennsylvania, received US 463,604, dated 17 November 1891, for "a convenient egg-holder and potato-holder adjustable in size to suit such articles of food of varying diameters and adapted to stand upright on a table or to be taken apart and used as a pair of tongs at will." A base with a tubular extension has an internal flange notched in pairs of different depths; a U-shaped spring-fork with spoon-shaped jaws stands in it on a stud, its stems spreading into one pair of notches. Shifted to a deeper pair, the jaws open wider; drawn out through the deepest pair, it is sugar-tongs.
This rung works out how the notch depth sets the jaws, then makes the base from tube and sheet and the fork from spring wire with dished jaws, and holds eggs of two sizes.
중급
About 4 hours
안내
1
1
Notch depth and jaw width
Notch depth and jaw width
Jupyter 노트북 불러오는 중…
2
2
Spring tongs before it
Spring tongs before it
The embedded blueprint makes table tongs of one spring. Iske stands such a spring-fork in a notched base so it holds an egg upright, and draws it out as tongs.
3
3
Read US 463,604
Read US 463,604
"B designates a pair of spring-tongs, or a 'spring-fork,' as it may be called, having approximately the shape of a narrow letter U, provided at its upper ends with spoon-shaped jaws B′, for holding eggs or other articles. The lower end b of this part B is enlarged and rounded, so as to fill or nearly fill the interior of the tubular extension A′ from side to side."
"The varying depth of the pairs of notches or recesses a′ a² a³ allows the adjustment of the holder to articles of varying sizes, it being necessary only to shift the spring fork or tongs from one pair of notches to another, which is easily done by first compressing and then turning them."
4
4
Make the holder and hold two eggs
Make the holder and hold two eggs
**Base.** Cut 3 cm of aluminium tube and epoxy it upright on a disc of aluminium sheet with a small hole in the middle as the recess a. Glue a ring of sheet inside the tube's top as the flange, and file three pairs of opposite notches in it, 1, 2.5 and 4 mm deep.
**Spring-fork.** Bend 50 cm of spring steel wire into a narrow U, its bottom rounded to fill the tube, with a short downward stud bent at the bottom that fits the hole. Hammer the wire's upper ends flat and dish them over a ball into spoon-shaped jaws.
**Test.** Stand the fork in the base with the stud in the hole and the stems in the shallowest notches, and set a small egg in the jaws. Squeeze the stems, turn them to the deepest pair, and hold a large egg. Draw the fork out and lift a boiled potato with it as tongs.
이 단계의 재료:
알루미늄 관0.03 미터
알루미늄 판1 개
2액형 에폭시1 개
스프링강 선0.5 미터
달걀2 개
감자1 개필요한 도구:
쇠톱(핵소)
판금 가위
정밀 줄(니들 파일) 세트
줄 (손줄)
무선 드릴
드릴 비트 세트
둥근 코 펜치
평집게
망치
바이스(만력)
디지털 캘리퍼스 6인치5
5
A holder that wobbles, drops the egg or will not change size
A holder that wobbles, drops the egg or will not change size
Spring-fork egg holder troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**Anthony Iske** of Lancaster, Pennsylvania, filed US 463,604 on 29 January 1891; it is dated 17 November 1891. He made the holders of sheet metal and wire, noted that egg-holders of spring-tongs in a base, held by a wedge-shaped plug, were already known from Porter's US 159,213 of 26 January 1875, and did not claim that. His claims cover the spring-tongs with the notched base and flange, the stud and central recess, the grooves of varying depth, and the whole holder with tongs usable alone.
**Honest limits.** Aluminium tube and sheet and a bent spring-wire fork stand in for his sheet-metal holder. The notebook treats the stems as rigid about the stud; its lengths and depths are examples. Your held eggs are the result.
재료
6- 0.03 미터플레이스홀더
- 1 개플레이스홀더
- 1 개플레이스홀더
- 0.5 미터플레이스홀더
- 2 개플레이스홀더
- 1 개플레이스홀더
관련 블루프린트
이 블루프린트들은 지식을 공유합니다 — 기술, 재료 또는 원리
CC0 퍼블릭 도메인
이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.
제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.