협업
예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
Tube Furnace: Porcelain Tube Wound with Platinum Wire in a Heat-Retaining Jacket (Stansfield, 1914)
Penny

작성자

Penny

3. 11월 2026DK
4
0
0
0
0

Tube Furnace: Porcelain Tube Wound with Platinum Wire in a Heat-Retaining Jacket (Stansfield, 1914)

The laboratory tube furnace: a porcelain tube wound with a spiral of platinum wire and wrapped in a heat-retaining jacket. Current through the wire heats the tube and whatever is inside it. A gas can be passed through the tube, the work watched through windows at the ends, and the temperature read with a thermocouple pushed in from one end. Result: a small furnace for heating a material in any chosen gas at moderate temperatures, well short of platinum's melting point. Source: A. Stansfield, The Electric Furnace: Its Construction, Operation and Uses (2nd ed., 1914), pp. 24-25 and 154. Unknown: sizes, the jacket material, current and voltage. Picture: Stansfield, Fig. 13.
중급
2 days

안내

1

Wind the tube

Take a tube of porcelain; fire-clay, silica or alundum also serve. Wind a spiral of platinum wire round it, leaving the leads free. Fix the turns so they cannot shift or touch each other when the wire expands with the heat, or they will short-circuit. Platinum foil can be wound instead of wire: its larger surface heats faster for the same weight of platinum. Not given: sizes, wire gauge, number of turns.

이 단계의 재료:

자기관자기관1 개
백금선백금선1 as required

필요한 도구:

플라이어 세트플라이어 세트
알 수 없는 치수알 수 없는 치수
2

Jacket it

Enclose the wound tube in a heat-retaining envelope, so the heat stays in the tube. The tube ends stick out through the envelope. Not given: the envelope material.

이 단계의 재료:

알 수 없는 재료알 수 없는 재료1 heat-retaining envelope

필요한 도구:

알 수 없는 치수알 수 없는 치수
3

Fit windows and the thermocouple

Close the tube ends with windows of glass or mica to watch the work. Push a thermocouple pyrometer in from one end and watch from the other. Leave a way in and out at the ends when you want a stream of gas through the tube.

이 단계의 재료:

운모 판운모 판1 end windows

필요한 도구:

표시기 달린 열전대표시기 달린 열전대
4

Heat

Put the material in the tube and pass current through the wire. The wire can run at any temperature below platinum's melting point (1,755 °C, 3,200 °F, as the book gives it). In practice the tube and envelope limit the furnace to temperatures far below that. Nickel or nichrome coils are cheaper, but they cannot go as hot and in time they oxidise. Not given: current and voltage.

필요한 도구:

표시기 달린 열전대표시기 달린 열전대
멀티미터멀티미터

재료

4
  • 플레이스홀더
  • 1 as required
    플레이스홀더
  • 1 heat-retaining envelope
    플레이스홀더
  • 1 end windows
    플레이스홀더

필요 도구

4

이 블루프린트로 만드는 것

CC0 퍼블릭 도메인

이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.

제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.

토론

(0)

로그인 하여 토론에 참여하세요

댓글 로딩 중...