ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Retrofocus Wide-Angle Lens
Reflex cameras put a mirror between the lens and the film, and a conventional wide-angle lens needs to sit closer to the film than the mirror allows. Pierre Angénieux in Paris reversed the telephoto idea: a diverging group in front, a converging group well behind it, so the lens's focus lies further back than its focal length.
**US 2,649,022**, "Wide-angle photographic objective lens assembly", Angénieux, filed 29. July 1950, granted 18. August 1953, describes an objective whose "distance along the axis between the back surface of the last lens and the focal plane … is relatively very large with respect to the focal length". (His US 2,649,021 of the same day is a different lens - a large-aperture projection objective.)
**You build one on the bench**, measure its back focus against its focal length, and fit a mirror in the room it leaves.
เริ่มต้น
90 minutes
คำแนะนำ
1
1
Two lenses, reversed
Two lenses, reversed
Front: concave about -50 mm, facing the scene. Rear: convex about 50 mm, 60 mm behind it. Aim out of a window.
วัสดุสำหรับขั้นตอนนี้:
เลนส์เว้า1 ชิ้น
ชุดเลนส์นูน1 ชุดเครื่องมือที่ต้องใช้:
โต๊ะทัศนศาสตร์และราง
ชุดที่จับเลนส์2
2
Find the focus
Find the focus
Move a tracing-paper screen until the distant scene is sharp. Measure rear lens to screen: the back focus. Measure the height of one far feature on the screen.
วัสดุสำหรับขั้นตอนนี้:
ม้วนกระดาษลอกลายแบบตัดเสื้อ1 แผ่น
เทปกาวย่นบังพื้นที่1 ม้วนเครื่องมือที่ต้องใช้:
ไม้บรรทัดเหล็ก3
3
Compare one lens
Compare one lens
Remove the concave lens. The +50 mm lens alone focuses about 50 mm behind itself; measure the same feature's height.
เครื่องมือที่ต้องใช้:
ไม้บรรทัดเหล็ก4
4
Fit the mirror
Fit the mirror
Put the concave lens back. Stand a small mirror at 45 degrees between the rear lens and the screen position and turn the screen to catch the image from the side - a reflex viewfinder. With the single lens there is no room.
วัสดุสำหรับขั้นตอนนี้:
กระจกเงาแบน1 ชิ้น5
5
Back focus vs focal length
Back focus vs focal length
กำลังโหลดสมุด Jupyter…
6
6
History & Context
History & Context
**What the patent specifies:** a diverging meniscus front element and a converging group far behind it, giving a back focal distance large compared with the focal length. **Modern build (derived):** two stock lenses and a mirror.
Angénieux sold it as the Retrofocus; nearly every SLR wide-angle since uses the layout. Its limits: the asymmetry brings barrel distortion, and the big front element makes the lens larger and heavier than a symmetric design.

วัสดุ
5- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชุดตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- 1 ม้วนตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
เครื่องมือที่จำเป็น
3- โต๊ะทัศนศาสตร์และรางค่าคอมมิชชัน 10%ตัวยึดตำแหน่ง
- ชุดที่จับเลนส์ค่าคอมมิชชัน 10%ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

