ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Argon: Air Led over Calcium Carbide and Calcium Chloride at 800 °C (Fischer and Ringe, Thorpe 1912)
Charlie

สร้างโดย

Charlie

1. พฤศจิกายน 2026DE
13
0
0
0
0

Argon: Air Led over Calcium Carbide and Calcium Chloride at 800 °C (Fischer and Ringe, Thorpe 1912)

Air is nearly 1 % argon. Red-hot calcium carbide with a little calcium chloride swallows both the oxygen and the nitrogen; argon, which combines with nothing, passes straight through. Result: about 11 litres of argon from 7 kg of carbide in two days. It still holds traces of neon, krypton and xenon (0.25 %, mostly neon). Source: Thorpe, Dictionary of Applied Chemistry vol. 1 (1912), p. 291, after Fischer and Ringe (Ber. 41, 2017). Not given: the vessel, the air volume, and how the water and carbon dioxide are taken out. Picture drawn by Youblob.
ขั้นสูง
2 days

คำแนะนำ

1

Mix the absorbent

Mix calcium carbide (90 %) with calcium chloride (10 %): 7 kg carbide takes about 0.78 kg chloride (our arithmetic). Fill a tube with it. Ours: a porcelain tube in a tube furnace.

เครื่องมือที่ต้องใช้:

แคลเซียมคาร์ไบด์แคลเซียมคาร์ไบด์
แคลเซียมคลอไรด์แคลเซียมคลอไรด์
หลอดพอร์ซเลนหลอดพอร์ซเลน
เตาเผาแบบท่อเตาเผาแบบท่อ
2

Drive off volatile matter

Heat the mixture under reduced pressure first, to drive off anything volatile.

เครื่องมือที่ต้องใช้:

ปั๊มสุญญากาศปั๊มสุญญากาศ
เตาเผาแบบท่อเตาเผาแบบท่อ
3

Lead air over it at 800 °C

Hold the mixture at 800 °C and lead air over it slowly. The oxygen and nitrogen are taken up; what comes out is mostly argon. Ours: draw the air through with an aspirator.

วัสดุสำหรับขั้นตอนนี้:

อากาศในบรรยากาศ - โลกอากาศในบรรยากาศ - โลก1 as required

เครื่องมือที่ต้องใช้:

ไพโรมิเตอร์ไพโรมิเตอร์
แอสไพเรเตอร์แอสไพเรเตอร์
เตาเผาแบบท่อเตาเผาแบบท่อ
4

Burn the traces over hot copper oxide

Lead the gas over hot copper oxide. It burns any hydrogen, hydrocarbons and carbon monoxide.

เครื่องมือที่ต้องใช้:

คอปเปอร์ออกไซด์คอปเปอร์ออกไซด์
หลอดพอร์ซเลนหลอดพอร์ซเลน
เตาเผาแบบท่อเตาเผาแบบท่อ
5

Take out water and carbon dioxide

Remove the water vapour and carbon dioxide. Ours: soda lime for the carbon dioxide, then phosphorus pentoxide for the water.

เครื่องมือที่ต้องใช้:

โซดาไลม์ (สารดูดซับ CO2)โซดาไลม์ (สารดูดซับ CO2)
ฟอสฟอรัสเพนทอกไซด์ฟอสฟอรัสเพนทอกไซด์
ขวดล้างแก๊สขวดล้างแก๊ส
6

Collect the argon

Collect the gas. Expect about 11 litres in two days from 7 kg of carbide. Ours: over water in gas jars.

เครื่องมือที่ต้องใช้:

อ่างนิวแมติกพร้อมขวดเก็บแก๊สอ่างนิวแมติกพร้อมขวดเก็บแก๊ส

วัสดุ

1

เครื่องมือที่จำเป็น

12

พิมพ์เขียวนี้สร้าง

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...