ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Chemical-Resistant Gloves: Butyl Latex over Natural Rubber on a Cotton Liner (Hart & Collyer, US 4,190,685, 1980)
Tex

สร้างโดย

Tex

3. พฤศจิกายน 2026FO
16
0
0
0
0

Chemical-Resistant Gloves: Butyl Latex over Natural Rubber on a Cotton Liner (Hart & Collyer, US 4,190,685, 1980)

Dipped rubber gloves built in layers on a knitted cotton liner: one coat of natural rubber, then five coats of butyl rubber, which lets very little liquid or vapour through. Each coat is dipped from latex on a porcelain hand form, and the whole glove is cured under steam and air pressure. Made in Canada to protect soldiers against chemical warfare agents; worn gloves showed no penetration in 24 hours of field use. Result: flexible, soft chemical-resistant gloves with a comfortable cotton lining. Source: J. A. Hart and J. C. Collyer, US 4,190,685 (1980), latex method. Unknown: sizes, the pigments. Picture: the patent drawing.
ขั้นสูง
Unknown

คำแนะนำ

1

Sew the cotton liner

Cut knitted or interlock cotton fabric to a glove shape and sew it into a glove. It stretches both ways, soaks up sweat and makes the glove easy to put on and take off. Not given: sizes, the knit.

วัสดุสำหรับขั้นตอนนี้:

ผ้าฝ้ายถักผ้าฝ้ายถัก1 liner

เครื่องมือที่ต้องใช้:

กรรไกรกรรไกร
จักรเย็บผ้าจักรเย็บผ้า
ขนาดที่ไม่ทราบขนาดที่ไม่ทราบ
2

Dip in coagulant

Pull the liner onto a porcelain hand form and flame it to smooth off the surface. Dip it in a 10 % solution of acetic acid in acetone, then turn the form for about 2½ minutes at 24 °C until it is dry. The coagulant sets the latex before it can soak through the cloth.

วัสดุสำหรับขั้นตอนนี้:

กรดแอซิติก (เกลเชียล)กรดแอซิติก (เกลเชียล)1 10 % in acetone
อะซิโตนอะซิโตน1 solvent

เครื่องมือที่ต้องใช้:

แม่พิมพ์มือถุงมือแม่พิมพ์มือถุงมือ
หัวพ่นไฟโพรเพนหัวพ่นไฟโพรเพน
3

Dip the natural rubber coat

Dip the liner into natural rubber latex (the patent uses LOTOL 1185) and leave it 5 seconds. Draw it out, turn it upside down and let it dry. Scrub the rubber film with an abrasive cleaner, a brush and water, and dry it again.

วัสดุสำหรับขั้นตอนนี้:

น้ำยางธรรมชาติน้ำยางธรรมชาติ1 bath
ผงขัดทำความสะอาดผงขัดทำความสะอาด1 as needed

เครื่องมือที่ต้องใช้:

แม่พิมพ์มือถุงมือแม่พิมพ์มือถุงมือ
แปรงขัดแปรงขัด
4

Mix the butyl latex bath

Mix, in parts by dry weight: butyl rubber latex 100, sulphur 3, zinc dibutyldithiocarbamate 4, zinc oxide 5, formaldehyde 0.1 as a preservative, a liquid dithiocarbamate curing accelerator 4 (Merac 255 in the patent), and 6.5 of pigments (olive drab in the patent). Not given: the pigments.

วัสดุสำหรับขั้นตอนนี้:

น้ำยางบิวทิลน้ำยางบิวทิล100 parts dry
กำมะถันกำมะถัน3 parts
ซิงก์ไดบิวทิลไดไทโอคาร์บาเมตซิงก์ไดบิวทิลไดไทโอคาร์บาเมต4 parts
ผงซิงก์ออกไซด์ผงซิงก์ออกไซด์5 parts
สารละลายฟอร์มาลดีไฮด์ (ฟอร์มาลิน 37 %)สารละลายฟอร์มาลดีไฮด์ (ฟอร์มาลิน 37 %)0.1 parts formaldehyde
สารเร่งไดไทโอคาร์บาเมตชนิดเหลวสารเร่งไดไทโอคาร์บาเมตชนิดเหลว4 parts
วัสดุที่ไม่ทราบวัสดุที่ไม่ทราบ6.5 parts pigment

เครื่องมือที่ต้องใช้:

เครื่องกวนเครื่องกวน
5

Dip five butyl coats

Dip the glove into the butyl latex and draw it out at 10 cm per minute. At once turn the form at about 8 rpm at 24 °C until the film has gelled, then dry it upside down in an oven at 66 °C for 1 hour. Wash, dip and dry again until there are five butyl coats; do not use the abrasive cleaner on the butyl film.

เครื่องมือที่ต้องใช้:

แม่พิมพ์มือถุงมือแม่พิมพ์มือถุงมือ
เตาอบตากเตาอบตาก
6

Cure and finish

Dry the glove at 66 °C for 1 hour. Cure it for 3 hours in a pressure vessel with 30 psi steam in the jacket (131 °C) and 26 psi air in the chamber. Strip the gloves from the forms while hot; when cool, trim them and wash them in soapy water.

วัสดุสำหรับขั้นตอนนี้:

สบู่สบู่1 as needed

เครื่องมือที่ต้องใช้:

หม้อนึ่งความดันตั้งโต๊ะหม้อนึ่งความดันตั้งโต๊ะ
กรรไกรกรรไกร

วัสดุ

13

เครื่องมือที่จำเป็น

9

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...