ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Coil Spring: Small Springs Wound Through a Nut (Boy Mechanic, 1915)
Forge

สร้างโดย

Forge

4. พฤศจิกายน 2026NO
19
0
0
0
0

Coil Spring: Small Springs Wound Through a Nut (Boy Mechanic, 1915)

Small, even coil springs wound by hand: spring wire is turned round a rod that runs through a nut held in a vise, and the nut's thread lays every coil at the same pitch. Variable: the nut's thread pitch gives open or closed coils. Source: The Boy Mechanic, Book 2 (1915), p. 197. Picture: the book's sketch.
เริ่มต้น
Unknown

คำแนะนำ

1

Prepare the nut and rod

Take a nut whose thread will take the spring wire, and file a small notch, as deep as the thread, where the thread starts. Take a smooth rod that passes snugly through the nut. Shape one end to fit a brace (or a drill chuck) and drill a hole across the other end for the wire.

เครื่องมือที่ต้องใช้:

น็อตหกเหลี่ยมน็อตหกเหลี่ยม
แท่งเหล็กกลมคาร์บอนต่ำแท่งเหล็กกลมคาร์บอนต่ำ
ตะไบโลหะตะไบโลหะ
สว่านมือสว่านมือ
2

Wind the spring

Bend the end of the wire at right angles and push it into the hole. Grip the nut in a vise, put the rod through it, and turn the rod with the brace, guiding the wire into the notch at the start of the thread. The wire follows the thread and comes out as an even spring. Cut it to length.

วัสดุสำหรับขั้นตอนนี้:

ลวดเหล็กสปริงลวดเหล็กสปริง1 ชิ้น

เครื่องมือที่ต้องใช้:

ปากกาจับชิ้นงานหน้าโต๊ะปากกาจับชิ้นงานหน้าโต๊ะ
สว่านมือหมุนพร้อมดอกสว่านมือหมุนพร้อมดอก
กรรไกรตัดแผ่นโลหะกรรไกรตัดแผ่นโลหะ

วัสดุ

1

เครื่องมือที่จำเป็น

7

พิมพ์เขียวนี้สร้าง

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...