ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Crutch: a Split Broom-Handle Crutch (Boy Mechanic, 1913)
A crutch made to the user's own length from a broom handle: split, soaked and spread into a Y, with a riveted hand grip and a shaped top piece nailed across for the armpit.
Make two for a pair.
Source: The Boy Mechanic, Book 1 (1913), p. 369. Picture: Figs. 1-3 of the book.
เริ่มต้น
Unknown
คำแนะนำ
1
1
Split and soak the handle
Split and soak the handle
Split a broom handle with a rip saw to within 1 ft of one end (Fig. 1). Soak it in water for three days so the halves will bend.
วัสดุสำหรับขั้นตอนนี้:
เดือยไม้1 broom handleเครื่องมือที่ต้องใช้:
เลื่อยโกรก
น้ำ2
2
Fit the grip
Fit the grip
Cut a grip as long as the hand is wide and bore it through the centre to take No. 10 wire. Set it between the two halves at the right height for the arm, run the wire through both halves and the grip, and rivet it over (Fig. 2).
วัสดุสำหรับขั้นตอนนี้:
เดือยไม้เนื้อแข็ง1 grip
ลวดเหล็กดัด1 No. 10เครื่องมือที่ต้องใช้:
เลื่อยมือ
สว่านมือหมุนพร้อมดอก
กรรไกรตัดแผ่นโลหะ
ค้อน3
3
Nail on the top piece
Nail on the top piece
Cut a top piece shaped as at A, Fig. 3, and nail it across the upper ends of the two halves.
วัสดุสำหรับขั้นตอนนี้:
แผ่นไม้สน1 top piece
ตะปู1 ชิ้นเครื่องมือที่ต้องใช้:
เลื่อยมือ
ค้อนวัสดุ
5- 1 broom handleตัวยึดตำแหน่ง
- 1 gripตัวยึดตำแหน่ง
- 1 No. 10ตัวยึดตำแหน่ง
- 1 top pieceตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้
