ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Fine-Tip Tweezers: One Steel Strip Bent and Spring-Tempered
Tweezers are two springy arms joined at one end: pressed, the tips close; let go, the spring opens them. They go back to predynastic Egypt. Make them from one strip of tool steel bent in half, temper it to a spring, and file the tips to fine needle points that meet exactly.
The picture: Roman tweezers, one strip bent at a loop, with a sliding ring.
ระดับกลาง
Half a day
คำแนะนำ
1
1
Draw the strip
Draw the strip
Draw tool steel to a strip about 8 mm wide, 0.8 mm thick and 21 cm long (our size), tapering both ends.
วัสดุสำหรับขั้นตอนนี้:
เหล็กเครื่องมือแบน1 ชิ้น
ถ่านไม้1 as requiredเครื่องมือที่ต้องใช้:
เตาตีเหล็กของช่างตีเหล็ก
ทั่ง
ค้อนหัวลิ่มขวาง
คีมช่างตีเหล็ก2
2
Bend it in half
Bend it in half
Anneal, then bend the strip in half round a small rod so the arms spring apart with the tips about 6 mm open. Square the arms in the vise.
เครื่องมือที่ต้องใช้:
ปากกาจับชิ้นงานหน้าโต๊ะ
ค้อนหัวลิ่มขวาง
เตาตีเหล็กของช่างตีเหล็ก3
3
Shape the tips
Shape the tips
File the ends to long, fine points with the needle files, and dress the inner faces so the tips meet along the last few millimetres. Check under the loupe.
เครื่องมือที่ต้องใช้:
ชุดตะไบเข็ม
ตะไบโลหะ
กล้องส่องขยาย4
4
Harden and spring-temper
Harden and spring-temper
Heat to cherry red and quench in oil, polish, then temper to blue so the arms spring back (our temper).
เครื่องมือที่ต้องใช้:
เตาตีเหล็กของช่างตีเหล็ก
ถังชุบน้ำ
น้ำมันตัดกลึง
คีมช่างตีเหล็ก5
5
Finish the points
Finish the points
Hone the tips lightly on the stone and check that they close evenly without crossing.
เครื่องมือที่ต้องใช้:
หินลับมีดเบอร์ 1000
กล้องส่องขยาย6
6
Closing force
Closing force
กำลังโหลดสมุด Jupyter…
เครื่องมือที่จำเป็น
11- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

