ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Gas Washing Bottle: a Single-Neck Bottle Made into a Safety Wash-Bottle (Gattermann, 1901)
Charlie

สร้างโดย

Charlie

3. พฤศจิกายน 2026DE
11
0
0
0
0

Gas Washing Bottle: a Single-Neck Bottle Made into a Safety Wash-Bottle (Gattermann, 1901)

A gas washing bottle that cannot suck back. A plain single-neck bottle is closed with a two-hole cork: through one hole a wide straight tube, and through it a narrow delivery tube bent at a right angle that reaches almost to the bottom; through the other the outlet. Gas bubbles up through the liquid (for example concentrated sulphuric acid to dry it). If the gas flow falters and the far vessel starts to suck, air enters between the two tubes and relieves it, so no liquid is drawn back. Result: a safety wash-bottle for washing or drying a gas stream. Source: L. Gattermann, The Practical Methods of Organic Chemistry (1901), pp. 344-345, Fig. 84. Unknown: sizes. Picture: the book's Figs. 82-85.
เริ่มต้น
Unknown

คำแนะนำ

1

Cut and bend the tubes

Cut a straight glass tube as wide as possible to pass through the cork. Cut a narrower delivery tube, long enough to reach almost to the bottom of the bottle, and bend it at a right angle in the flame. Bend an outlet tube. Not given: bores and lengths.

วัสดุสำหรับขั้นตอนนี้:

หลอดแก้วหลอดแก้ว3 wide tube, delivery tube, outlet

เครื่องมือที่ต้องใช้:

เลื่อยตัดเหล็กเลื่อยตัดเหล็ก
ตะเกียงบุนเซนตะเกียงบุนเซน
2

Assemble and use it

Bore a cork with two holes to fit a single-neck bottle. Push the wide straight tube through one hole and the outlet through the other. Pass the delivery tube down through the wide tube so it reaches almost to the bottom of the bottle. Pour in the washing or drying liquid (for example concentrated sulphuric acid to dry hydrochloric acid gas) so the delivery tube dips in it, and pass the gas in through the delivery tube and out through the outlet. If the gas current becomes irregular and the far vessel starts to suck back, air enters between the delivery tube and the wide tube and relieves it, so no liquid is drawn back. Not given: the bottle size.

วัสดุสำหรับขั้นตอนนี้:

ขวดแก้ว (ใส)ขวดแก้ว (ใส)1 single-neck bottle
จุกไม้ก๊อกจุกไม้ก๊อก1 two-hole

เครื่องมือที่ต้องใช้:

ที่เจาะจุกไม้ก๊อกที่เจาะจุกไม้ก๊อก

วัสดุ

3
  • 3 wide tube, delivery tube, outlet
    ตัวยึดตำแหน่ง
  • 1 single-neck bottle
    ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง

เครื่องมือที่จำเป็น

3

พิมพ์เขียวนี้สร้าง

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...