ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Flower Holder for a Vase: Crossed Brass Strips Carrying Slit Spring Cones That Grip Each Stem (Green, 1903)
Forge

สร้างโดย

Forge

13. พฤศจิกายน 2026NO
15
0
0
0
0

Flower Holder for a Vase: Crossed Brass Strips Carrying Slit Spring Cones That Grip Each Stem (Green, 1903)

Francis W. Green of Brooklyn received US 720,132, dated 10 February 1903, for a holder that sits on the mouth of a vase and holds each flower separately, at the height you choose. Metal strips cross at the centre and hook over the rim; small cones of sheet metal, slit at the bottom, hang in holes along the strips and grip each stem like a spring, so a bunch can be arranged "as may suit the individual taste of the user". We make it from brass. All sizes are ours.
เริ่มต้น
About 3 hours

คำแนะนำ

1

Cone blank

กำลังโหลดสมุด Jupyter…
2

Read US 720,132

"The stems of the sprays or flowers may be inserted and forced downward through the conical holder until the head of the flower or spray is at the desired position in the holder."
3

Make the frame

Cut four brass strips a little longer than your vase's mouth is wide. Drill each at its centre and rivet all four together crossed at equal angles with a short piece of brass tube flared at both ends, his hollow rivet 2. Bend the ends down to make ears that rest over the rim of the vase.

วัสดุสำหรับขั้นตอนนี้:

แถบทองเหลืองแถบทองเหลือง1 ชิ้น
ท่อทองเหลืองท่อทองเหลือง1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยตัดเหล็กเลื่อยตัดเหล็ก
สว่านแท่นสว่านแท่น
ชุดดอกสว่านชุดดอกสว่าน
เหล็กตอกนำศูนย์เหล็กตอกนำศูนย์
ค้อนหัวกลมค้อนหัวกลม
คีมปากแบนคีมปากแบน
ปากกาจับชิ้นงานหน้าโต๊ะปากกาจับชิ้นงานหน้าโต๊ะ
4

Punch the holes

Drill holes along each strip, spaced so the flowers will stand apart, just big enough for a cone's narrow part to pass and its lip to rest on the strip.

เครื่องมือที่ต้องใช้:

สว่านแท่นสว่านแท่น
ชุดดอกสว่านชุดดอกสว่าน
ชุดตะไบชุดตะไบ
5

Make the cones

Mark the notebook's blank on brass sheet, cut it out, roll it round a tapered rod or nail into a cone small end down, overlap the seam and solder it. Turn the wide end out into a small lip 6. Slit the narrow end up a short way with a saw so it springs.

วัสดุสำหรับขั้นตอนนี้:

แผ่นทองเหลืองแผ่นทองเหลือง1 ชิ้น
ตะกั่วบัดกรีดีบุก-ตะกั่วตะกั่วบัดกรีดีบุก-ตะกั่ว1 ชิ้น
ฟลักซ์ฟลักซ์1 ชิ้น

เครื่องมือที่ต้องใช้:

กรรไกรตัดแผ่นโลหะกรรไกรตัดแผ่นโลหะ
คีมปากกลมคีมปากกลม
หัวแร้งไฟฟ้าหัวแร้งไฟฟ้า
เลื่อยช่างทองเลื่อยช่างทอง
ชุดตะไบชุดตะไบ
6

Fit the cones

Drop a cone into each hole and solder its lip to the strip, or make the hole a little small and press the cone in until the lip sits on the strip, as he allows.

วัสดุสำหรับขั้นตอนนี้:

ตะกั่วบัดกรีดีบุก-ตะกั่วตะกั่วบัดกรีดีบุก-ตะกั่ว1 ชิ้น
ฟลักซ์ฟลักซ์1 ชิ้น

เครื่องมือที่ต้องใช้:

หัวแร้งไฟฟ้าหัวแร้งไฟฟ้า
คีมปากแบนคีมปากแบน
7

Arrange flowers

Set the frame on the vase. Push each stem down through a cone until the flower is at the height you want: the slit end grips it. Lift a flower out and put another in without disturbing the rest.
8

Troubleshooting

Flower holder troubleshooting.

Flow

Loading...
9

History and honest limits

**Francis W. Green** of Brooklyn, US 720,132, dated 10 February 1903, filed 28 November 1902. He claimed "a frame adapted to rest over the mouth of a vase or other receptacle and provided with a number of vertically-disposed tapering spring flower-holders open at both ends". Not built: his adjustable frame ends (Fig. 6). He gives no sizes and does not limit the material: brass, all sizes and the solder are ours.

วัสดุ

5

เครื่องมือที่จำเป็น

12

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...