ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Hand Carders: Bent Wire Pins Set in Leather on Beech Paddles
Tex

สร้างโดย

Tex

14. ตุลาคม 2026FO
19
0
0
0
0

Hand Carders: Bent Wire Pins Set in Leather on Beech Paddles

Hand carders are a pair of paddles faced with card cloth: a flexible backing set with close rows of wire pins. Wool brushed between them lines up and comes off as a rolag for spinning. Bend wire into U-shaped staples, push them through pricked leather, bend every pin over at the same angle, and nail the cloth to two beech paddles. The picture: our diagram, a card from the face and its pins in section.
ระดับกลาง
Several days

คำแนะนำ

1

Paddles

Saw two beech paddles about 20 × 10 cm with a handle each, and round the edges with the rasp.

วัสดุสำหรับขั้นตอนนี้:

ไม้บีชแปรรูปไม้บีชแปรรูป1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยฉลุเลื่อยฉลุ
ตะไบหยาบสำหรับไม้ตะไบหยาบสำหรับไม้
2

Staples

Cut steel wire into short lengths and bend each into a U, its two legs the pins (step 5 gives the count).

วัสดุสำหรับขั้นตอนนี้:

ลวดเหล็กลวดเหล็ก50 m

เครื่องมือที่ต้องใช้:

คีมตัดลวดปากเฉียงคีมตัดลวดปากเฉียง
คีมปากแบนคีมปากแบน
3

Set the pins

Rule a grid on two pieces of leather and prick two holes for each staple with the awl. Push the staples through from the back, then bend all the pins over the same way at the same height, so they lean toward the handle.

วัสดุสำหรับขั้นตอนนี้:

หนังฟอกฝาดหนังฟอกฝาด1 ชิ้น

เครื่องมือที่ต้องใช้:

ไม้บรรทัดไม้บรรทัด
เหล็กหมาด (สว่านเจาะรูมือ)เหล็กหมาด (สว่านเจาะรูมือ)
คีมปากแบนคีมปากแบน
มีดคัตเตอร์อเนกประสงค์มีดคัตเตอร์อเนกประสงค์
4

Mount the cloth

Stretch each piece over its paddle face and nail it round the edges. The two cards must lean the same way when held face to face in use.

วัสดุสำหรับขั้นตอนนี้:

ตะปูเหล็กตะปูเหล็ก24 ชิ้น

เครื่องมือที่ต้องใช้:

ค้อนหัวลิ่มขวางค้อนหัวลิ่มขวาง
5

Pins for a card

กำลังโหลดสมุด Jupyter…

วัสดุ

4
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง

เครื่องมือที่จำเป็น

8

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...