ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Magnifying Glass from a Hand-Ground Lens
A magnifying glass is a convex lens in a frame with a handle. A typical one has a focal length of 25 cm, an optical power of 4 dioptres, and is sold as "2×": its magnifying power is 0.25 m × 4 + 1 = 2 for an eye whose near point is 25 cm. Here the lens is ground plano-convex from crown glass (refractive index about 1.52). For a plano-convex lens the focal length is R / (n − 1), so a 25 cm focal length needs a curve of radius about 13 cm. The lens is then set in a turned wooden ring with a handle; those sizes are ours.
ขั้นสูง
2–3 days
คำแนะนำ
1
1
Grind the lens
Grind the lens
Following the lens-grinding blueprint, grind one face of a glass disc to a spherical curve of about 13 cm radius, working down through the grits, then polish it clear with cerium oxide on a pitch lap. Leave the other face flat.
วัสดุสำหรับขั้นตอนนี้:
แผ่นแก้ว1 ชิ้น
กาวชันสน100 ก.เครื่องมือที่ต้องใช้:
ไม้บรรทัด
ผงขัดซีเรียมออกไซด์2
2
Check the focus
Check the focus
Hold the lens in sunlight and move a card behind it until the spot is smallest; the distance from lens to card is the focal length and should be close to 25 cm. Do not look at the Sun through it.
เครื่องมือที่ต้องใช้:
ไม้บรรทัด3
3
Turn the frame
Turn the frame
Turn a ring from a hardwood blank with a groove on the inside just wider than the lens edge, and part it off.
วัสดุสำหรับขั้นตอนนี้:
ท่อนไม้เนื้อแข็ง1 ชิ้นเครื่องมือที่ต้องใช้:
เครื่องกลึงไม้
สิ่วหน้าโค้ง
มีดตัดงานกลึง4
4
Turn the handle
Turn the handle
Turn a handle from a hardwood dowel and fix it into a hole drilled in the ring.
วัสดุสำหรับขั้นตอนนี้:
เดือยไม้เนื้อแข็ง1 ชิ้น
อีพ็อกซีสองส่วน5 มล.เครื่องมือที่ต้องใช้:
เครื่องกลึงไม้5
5
Set the lens
Set the lens
Saw the ring through at the handle, spring the lens into the groove, glue the cut closed and wax the wood.
วัสดุสำหรับขั้นตอนนี้:
ขี้ผึ้ง10 ก.วัสดุ
6- 1 ชิ้นตัวยึดตำแหน่ง
- 100 ก.ตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 5 มล.ตัวยึดตำแหน่ง
- 10 ก.ตัวยึดตำแหน่ง
เครื่องมือที่จำเป็น
6- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

