ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Neodymium Magnets: Melt-Spun Ribbon Milled, Pressed in a Field, Sintered and Magnetised at 30 kOe (Sato, Tokin, US 4,881,986)
Charlie

สร้างโดย

Charlie

31. ตุลาคม 2026DE
14
0
0
0
0

Neodymium Magnets: Melt-Spun Ribbon Milled, Pressed in a Field, Sintered and Magnetised at 30 kOe (Sato, Tokin, US 4,881,986)

Squirting the molten Nd-Fe-B alloy onto a spinning copper wheel freezes it into ribbon with crystals only a tenth of a micron across. Milled fine, lined up in a magnetic field, pressed and sintered, it makes a strong anisotropic magnet, which a 30 kOe pulse then magnetises. Result: sintered neodymium magnets, above 16 MGOe when the powder is finer than 15 microns. Source: Sato and Tachiya, US 4,881,986 (Tokin, 1989), Example 1. Not given: magnet shape and size. Picture drawn by Youblob.
ขั้นสูง
3 days

คำแนะนำ

1

Melt the alloy in argon

Weigh 35.0 % neodymium, 0.9 % boron (as ferroboron with 20 % B) and the rest electrolytic iron, by weight, and induction-melt them in argon into an ingot. Ours, worked out: 35 parts neodymium, 4.5 ferroboron, 60.5 iron. Sato's neodymium was 97 % (with Ce and Pr); ours is the 99 % metal.

วัสดุสำหรับขั้นตอนนี้:

โลหะนีโอดิเมียมโลหะนีโอดิเมียม35 parts
เฟอร์โรโบรอนเฟอร์โรโบรอน4.5 parts
เหล็กอิเล็กโทรไลต์เหล็กอิเล็กโทรไลต์60.5 parts

เครื่องมือที่ต้องใช้:

ตราชั่งสองแขนตราชั่งสองแขน
เตาเหนี่ยวนำเตาเหนี่ยวนำ
ถังก๊าซความดันถังก๊าซความดัน
2

Melt-spin a ribbon

Remelt in argon and squirt the alloy through a small orifice onto a copper wheel whose rim moves at 15 m/s. It freezes into ribbon about 5 mm wide and 100 microns thick, with R2Fe14B grains about 0.1 micron.

เครื่องมือที่ต้องใช้:

เตาเหนี่ยวนำเตาเหนี่ยวนำ
เครื่องเมลต์สปินเนอร์เครื่องเมลต์สปินเนอร์
ถังก๊าซความดันถังก๊าซความดัน
3

Ball-mill to powder

Crush and ball-mill the ribbon. Particle size: Sato made 0.5 to 30 microns; below 15 microns the magnet tops 16 MGOe, better below 10, best at 5 microns or less.

เครื่องมือที่ต้องใช้:

หม้อบดลูกเหล็กหม้อบดลูกเหล็ก
4

Press in a 20 kOe field and sinter

Press the powder at 1 ton/cm² in a 20 kOe field. Sinter at 1,050 °C for 1 hour in vacuum and 1 more hour in argon, then quench; age at 630 °C for 1 hour in argon.

เครื่องมือที่ต้องใช้:

เครื่องอัดในสนามแม่เหล็กเครื่องอัดในสนามแม่เหล็ก
เตาเผาแบบท่อเตาเผาแบบท่อ
ปั๊มสุญญากาศปั๊มสุญญากาศ
ถังก๊าซความดันถังก๊าซความดัน
5

Magnetise at 30 kOe

Magnetise the sintered body in a field of about 30 kOe.

เครื่องมือที่ต้องใช้:

เครื่องอัดแม่เหล็กเครื่องอัดแม่เหล็ก

วัสดุ

3

เครื่องมือที่จำเป็น

9

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...