ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Wishbone-Mast Ice Yacht: 16 ft Backbone, Twin-Pole Mast and Double Lateen Booms (Boy Mechanic, 1919)
Woody

สร้างโดย

Woody

13. พฤศจิกายน 2026NO
11
0
0
0
0

Wishbone-Mast Ice Yacht: 16 ft Backbone, Twin-Pole Mast and Double Lateen Booms (Boy Mechanic, 1919)

John F. Pjerrou's ice yacht from The Boy Mechanic, Book 3 (1919), for one or two passengers: a 16 ft spruce backbone on a 12 ft 6 in runner plank, oak runners shod with half-round iron, a mast of two 12 ft poles joined at the head, and two lateen sails on a yard and two 16 ft booms that spread into a V when running before the wind. It takes down for storage.
ขั้นสูง
Several weeks

คำแนะนำ

1

Main sizes and the mast's height

กำลังโหลดสมุด Jupyter…
2

Read The Boy Mechanic, Book 3

"The dimensions given are for a small yacht, and care must be taken, in adapting the design, to maintain proper proportions for stability and safety."
3

Make the backbone and runner plank

Use only the best straight-grained spruce or white pine. Backbone: 4 in thick, 16 ft long and 8 in high at the centre, with a ridge 8 in high and 2 ft 6 in long; taper it from the middle, 5 ft 6 in from the forward end, to 4 in at each end, and fit a three-eye metal ring at the bow (Figs. 1, 5). Runner plank: 2 in thick, 10 in wide, 12 ft 6 in long, tapered to 8 in at the ends. Set the backbone on the plank at right angles, 6 ft from the bow, and clamp them with two strap bolts, washers and nuts (Figs. 2, 3).

วัสดุสำหรับขั้นตอนนี้:

ไม้สนแปรรูปไม้สนแปรรูป2 ชิ้น
ห่วงโลหะห่วงโลหะ1 ชิ้น
ยูโบลต์ยูโบลต์2 ชิ้น
แหวนรองแบนแหวนรองแบน4 ชิ้น
น็อตหกเหลี่ยมน็อตหกเหลี่ยม4 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
กบไสไม้กบไสไม้
มีดสองมือมีดสองมือ
สว่านมือหมุนพร้อมดอกสว่านมือหมุนพร้อมดอก
ประแจเลื่อนประแจเลื่อน
ตลับเมตรตลับเมตร
ดินสอดินสอ
4

Fit the guides and forward runners

Bolt guides of straight-grained oak, 1-1/2 by 3 by 14 in, to the plank ends with 5/16 in carriage bolts, and bolt oak chocks at each tapered edge (Fig. 4). Make the forward runners of oak, 1-1/2 by 5 by 36 in, shaped at the ends as drawn, and shoe them with half-round strap iron held by screws with carefully countersunk heads. Pivot them on 5/8 in bolts (5 in long in Fig. 1), nuts to the inner side, with washers and jam nuts, or rivet the bolt ends slightly so the nuts cannot work loose.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้โอ๊กขาวแผ่นไม้โอ๊กขาว3 ชิ้น
สลักเกลียวหัวกลมสลักเกลียวหัวกลม8 ชิ้น
เหล็กเส้นครึ่งวงกลมเหล็กเส้นครึ่งวงกลม2 ชิ้น
สกรูไม้สกรูไม้1 ชิ้น
แหวนรองแบนแหวนรองแบน4 ชิ้น
น็อตหกเหลี่ยมน็อตหกเหลี่ยม4 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
กบไสไม้กบไสไม้
สว่านมือหมุนพร้อมดอกสว่านมือหมุนพร้อมดอก
สว่านมือสว่านมือ
ชุดดอกลบมุมรูชุดดอกลบมุมรู
เลื่อยตัดเหล็กเลื่อยตัดเหล็ก
ประแจเลื่อนประแจเลื่อน
5

Make the stern runner and steering

Make the stern runner of oak, 1-1/2 by 5 by 30 in, shod like the others. Pivot it on a 3/8 in bolt in a hanger of heavy iron strip bent into a U and riveted to a vertical shaft. Put a heavy rubber washer, protected by a metal one, on the shaft; thread its upper end for a washer and nut, slip a section of pipe over the shaft, and clamp the steering handle (2 ft 10 in in Fig. 1) on a squared part of the shaft. The hanger may be forged, or made by a blacksmith.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้โอ๊กขาวแผ่นไม้โอ๊กขาว1 ชิ้น
เหล็กเส้นครึ่งวงกลมเหล็กเส้นครึ่งวงกลม1 ชิ้น
เหล็กแบนกล้าละมุนเหล็กแบนกล้าละมุน1 ชิ้น
เหล็กเส้นกลมเหล็กกล้าละมุนเหล็กเส้นกลมเหล็กกล้าละมุน1 ชิ้น
หมุดย้ำเหล็กหมุดย้ำเหล็ก2 ชิ้น
สลักเกลียวหัวกลมสลักเกลียวหัวกลม1 ชิ้น
แหวนยางรองแหวนยางรอง1 ชิ้น
แหวนรองแบนแหวนรองแบน2 ชิ้น
น็อตหกเหลี่ยมน็อตหกเหลี่ยม2 ชิ้น
ท่อเหล็กชุบสังกะสีท่อเหล็กชุบสังกะสี1 ชิ้น

เครื่องมือที่ต้องใช้:

เตาตีเหล็กเตาตีเหล็ก
ทั่งทั่ง
ค้อนค้อน
ปากกาจับชิ้นงานหน้าโต๊ะปากกาจับชิ้นงานหน้าโต๊ะ
เลื่อยตัดเหล็กเลื่อยตัดเหล็ก
สว่านมือสว่านมือ
ตะไบ (ตะไบมือ)ตะไบ (ตะไบมือ)
ประแจเลื่อนประแจเลื่อน
6

Build the cockpit

Fix a cockpit 5 ft long and 3 ft wide, with 4 in coaming, to the lower side of the backbone toward the stern; fasten its floor to the backbone with lag screws and fasten the coaming securely. Square corners are easiest; rounded ends with steamed, bent coaming are better. Larger craft may carry it on ribs.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้สนแผ่นไม้สน4 ชิ้น
สกรูหัวหกเหลี่ยมยึดไม้ (แล็กสกรู)สกรูหัวหกเหลี่ยมยึดไม้ (แล็กสกรู)6 ชิ้น
สกรูไม้สกรูไม้1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยมือเลื่อยมือ
สว่านมือหมุนพร้อมดอกสว่านมือหมุนพร้อมดอก
ประแจเลื่อนประแจเลื่อน
ตลับเมตรตลับเมตร
7

Square up and stay the frame

Line up runners, plank and backbone at right angles so the craft tracks true. Hold them with four 1/4 in wire-rope stays with turnbuckles, from eyes on the bow band and on the bands at the plank ends to an eyebolt below the cockpit (Fig. 2). Loop each rope end and clamp the eye with steel clamps made for the purpose (wire-rope clips); metal thimbles in the loops make a better finish.

วัสดุสำหรับขั้นตอนนี้:

ลวดสลิงลวดสลิง1 ชิ้น
เกลียวเร่งสาย (เทิร์นบัคเคิล)เกลียวเร่งสาย (เทิร์นบัคเคิล)4 ชิ้น
ปลอกนิ้วเย็บผ้าปลอกนิ้วเย็บผ้า8 ชิ้น
กิ๊บจับลวดสลิงกิ๊บจับลวดสลิง8 ชิ้น
สลักเกลียวหัวห่วงสลักเกลียวหัวห่วง1 ชิ้น

เครื่องมือที่ต้องใช้:

เลื่อยตัดเหล็กเลื่อยตัดเหล็ก
ประแจเลื่อนประแจเลื่อน
ตลับเมตรตลับเมตร
8

Make the wishbone mast

Shape two poles of hickory or ash, 3-1/2 in thick at the base and 2 in at the top (12 ft in Fig. 6). Join them carefully at the masthead, bolt them together into an oak breast hook, and reinforce the joint with an iron strap with an eye at its upper end for the forward stay. Step the lower ends in sockets in the runner plank, about 8 ft apart, reinforced with oak mast blocks, and fit their projecting ends with 3 in two-eyed bands for the stays (Figs. 4, 6).

วัสดุสำหรับขั้นตอนนี้:

เสาไม้เสาไม้2 ชิ้น
แผ่นไม้โอ๊กขาวแผ่นไม้โอ๊กขาว1 ชิ้น
เหล็กแบนกล้าละมุนเหล็กแบนกล้าละมุน1 ชิ้น
สลักเกลียวหัวกลมสลักเกลียวหัวกลม2 ชิ้น
น็อตหกเหลี่ยมน็อตหกเหลี่ยม2 ชิ้น

เครื่องมือที่ต้องใช้:

มีดสองมือมีดสองมือ
กบไสไม้กบไสไม้
เลื่อยมือเลื่อยมือ
สว่านมือหมุนพร้อมดอกสว่านมือหมุนพร้อมดอก
สิ่วสิ่ว
เตาตีเหล็กเตาตีเหล็ก
ทั่งทั่ง
ค้อนค้อน
9

Make the yard and booms

Make the yard and two booms of hickory or ash, each 16 ft long, 2-3/4 in at the middle tapering to 1-1/2 in at the ends, with metal rings on the ends against splitting. Bolt loops to their forward ends to engage an eyebolt and ring on the backbone at the bow; set the eyebolt in a slotted plate of 3/16 in sheet iron, fastened by a lever nut (Fig. 5).

วัสดุสำหรับขั้นตอนนี้:

เสาไม้เสาไม้3 ชิ้น
ห่วงโลหะห่วงโลหะ6 ชิ้น
สลักเกลียวหัวห่วงสลักเกลียวหัวห่วง1 ชิ้น
แผ่นเหล็กกล้าละมุนแผ่นเหล็กกล้าละมุน1 ชิ้น
เหล็กแบนกล้าละมุนเหล็กแบนกล้าละมุน1 ชิ้น
สลักเกลียวหัวกลมสลักเกลียวหัวกลม3 ชิ้น
น็อตหกเหลี่ยมน็อตหกเหลี่ยม3 ชิ้น

เครื่องมือที่ต้องใช้:

มีดสองมือมีดสองมือ
กบไสไม้กบไสไม้
เลื่อยตัดเหล็กเลื่อยตัดเหล็ก
สว่านมือสว่านมือ
ตะไบ (ตะไบมือ)ตะไบ (ตะไบมือ)
ปากกาจับชิ้นงานหน้าโต๊ะปากกาจับชิ้นงานหน้าโต๊ะ
10

Sew the sails

Make two lateen sails of 8-oz unbleached cotton duck: lap the breadths about 1 in and stitch along the edge (or fold 1 in and double-stitch), the seams parallel to the leech. Reinforce each corner with a triangular patch of duck and bind the edges with 1/4 in tarred rope, using a sailor's palm, a diamond-pointed needle and sail twine, well waxed (the wax is ours: beeswax). Along the yard and boom edges punch holes, set two 3/4 in brass grommet rings in each, one each side, and overcast them with buttonhole stitch. Sew in reef points of 1/8 in cotton rope, whipped at the ends.

วัสดุสำหรับขั้นตอนนี้:

ผ้าใบผ้าใบ1 ชิ้น
ด้ายเย็บใบเรือด้ายเย็บใบเรือ1 ชิ้น
ขี้ผึ้งขี้ผึ้ง1 ชิ้น
เชือกชุบน้ำมันดินเชือกชุบน้ำมันดิน1 ชิ้น
ห่วงตาไก่ทองเหลืองห่วงตาไก่ทองเหลือง40 ชิ้น
เชือกฝ้ายตีเกลียวเชือกฝ้ายตีเกลียว1 ชิ้น

เครื่องมือที่ต้องใช้:

ปลอกฝ่ามือช่างใบเรือปลอกฝ่ามือช่างใบเรือ
เข็มเย็บใบเรือเข็มเย็บใบเรือ
เครื่องเจาะรูกระดาษเครื่องเจาะรูกระดาษ
กรรไกรกรรไกร
ตลับเมตรตลับเมตร
11

Set up and rig

Fit the forward ring and strap bolts, the runners and steering, then step the mast, clamp the masthead and fit the bands; set the bottom stays and the masthead stay with the turnbuckles. Lace the sails to yard and booms and fix the forward ends at the bow. Run a 3/8 in halyard from the yard through a pulley at the masthead and a second on the runner plank to cleats by the cockpit, and haul up so the sails set. Lash the main sheets to the boom ends, through pulleys at the stern of the backbone and on the booms about 1 ft and 5 ft from their ends, then to cleats at the cockpit; the second boom needs a duplicate set. Taking down is the reverse.

วัสดุสำหรับขั้นตอนนี้:

เชือกเชือก1 ชิ้น
รอกรอก6 ชิ้น
พุกผูกเชือก (คลีต)พุกผูกเชือก (คลีต)4 ชิ้น
สกรูไม้สกรูไม้1 ชิ้น

เครื่องมือที่ต้องใช้:

ประแจเลื่อนประแจเลื่อน
สว่านมือสว่านมือ
12

Finish

Smooth the masts, yard and booms, sandpaper them lightly and give them several coats of spar varnish; paint the other woodwork. He gives the metal fittings two coats of red lead "or other good paint for use on metals exposed to the weather": red lead is a lead poison, so use the other paint.

วัสดุสำหรับขั้นตอนนี้:

กระดาษทรายกระดาษทราย1 ชิ้น
วานิชเสากระโดงวานิชเสากระโดง1 ชิ้น
สีน้ำมันสีน้ำมัน1 ชิ้น

เครื่องมือที่ต้องใช้:

แปรงทาสีหน้ากว้างแปรงทาสีหน้ากว้าง
13

Sailing and troubleshooting

Ice yacht sailing.

Flow

Loading...
14

History and honest limits

From "A Wishbone-Mast Ice Yacht" by John F. Pjerrou, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, pp. 17-20). He gives no sail outline sizes. The tools, the metric figures and the choice of the non-lead paint he allows are ours.

วัสดุ

35

เครื่องมือที่จำเป็น

21

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...