ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Plate Shears: Bench Shears Made from a Flat File (Shop Notes, 1919)
Bench shears for sheet metal too heavy for hand snips: a 14 in flat file, ground and sharpened, works as a lever knife bolted against a fixed cutter forged from scrap steel and fastened to the bench.
Source: Popular Mechanics Shop Notes for 1919, p. 3271. Unknown: cutter and bolt sizes. Picture: the book's photo and drawing.
ระดับกลาง
Unknown
คำแนะนำ
1
1
Make the moving knife
Make the moving knife
Take a 14 in flat file. Grind one side smooth and sharpen part of the tip and one edge. Heat it cherry red and punch the bolt hole.
วัสดุสำหรับขั้นตอนนี้:
ตะไบโลหะ1 14 in flat fileเครื่องมือที่ต้องใช้:
เครื่องเจียรตั้งโต๊ะ
เตาตีเหล็ก
คีมคีบ
เหล็กตอกร้อน
ค้อน2
2
Forge the fixed cutter
Forge the fixed cutter
Forge the fixed cutter from part of an old plowshare or other suitable scrap steel, bent as in the drawing so it can be screwed to the bench, with a hole for the pivot bolt.
วัสดุสำหรับขั้นตอนนี้:
เหล็กกล้าคาร์บอนเส้น (0.6 % C)1 scrap steelเครื่องมือที่ต้องใช้:
เตาตีเหล็ก
คีมคีบ
ค้อน
เหล็กตอกร้อน3
3
Assemble on the bench
Assemble on the bench
Screw the fixed cutter to the bench and bolt the file knife to it. Use a locknut on the bolt, or rivet the end over.
วัสดุสำหรับขั้นตอนนี้:
สลักเกลียวหัวหกเหลี่ยม - เกรด 8.81 ชิ้น
น็อตหกเหลี่ยม2 nut and locknut
สกรูไม้1 ชิ้นเครื่องมือที่ต้องใช้:
ประแจเลื่อน
ไขควงปากแบนวัสดุ
5- 1 14 in flat fileตัวยึดตำแหน่ง
- 1 scrap steelตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- 2 nut and locknutตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้
