ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Potash Alum from Alum Shale
Alum shale is a mix of iron pyrites, clay (aluminium silicate) and bituminous matter. Left to weather in the air, the pyrites oxidise and form sulphuric acid, which attacks the clay and turns it into aluminium sulphate. Water draws this out as a solution, which is settled, boiled down until iron sulphate crystallises out on cooling, then boiled down further to a specific gravity of 1.40. Stirred with the right amount of potassium sulphate, it throws down potash alum as a fine powder, alum meal. Alum crystallises in regular octahedra and is very soluble in water. Shale was also roasted to speed this up, which gives off sulphur dioxide; that route is not used here.
ขั้นสูง
Weeks (weathering) plus days
คำแนะนำ
1
1
Weather the shale
Weather the shale
Spread the broken shale in the open and let it weather, so the pyrites oxidise and the acid formed turns the clay into aluminium sulphate.
วัสดุสำหรับขั้นตอนนี้:
หินดินดานสารส้ม1 as required2
2
Extract
Extract
Wash the weathered mass with water, step by step, until the solution reaches a specific gravity of 1.16.
วัสดุสำหรับขั้นตอนนี้:
น้ำ1 as requiredเครื่องมือที่ต้องใช้:
ไฮโดรมิเตอร์3
3
Settle
Settle
Let the solution stand so calcium sulphate and basic iron sulphate settle out, then draw it off.
เครื่องมือที่ต้องใช้:
ถังตกตะกอน4
4
Remove the iron
Remove the iron
Boil it down until iron (ferrous) sulphate crystallises on cooling; draw off the liquor and boil it down to a specific gravity of 1.40.
เครื่องมือที่ต้องใช้:
กระทะเคี่ยวระเหย
ไฮโดรมิเตอร์5
5
Precipitate the alum
Precipitate the alum
Let it stand, decant it from any sediment, add the calculated amount of potassium sulphate and stir well: the alum falls as a fine powder, alum meal. (With much iron present, potassium chloride is used instead.)
วัสดุสำหรับขั้นตอนนี้:
โพแทสเซียมซัลเฟต1 as requiredเครื่องมือที่ต้องใช้:
ถังตกตะกอนวัสดุ
3- 1 as requiredตัวยึดตำแหน่ง
- 1 as requiredตัวยึดตำแหน่ง
- 1 as requiredตัวยึดตำแหน่ง
เครื่องมือที่จำเป็น
3- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้



