ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Steel Needle: Pointed, Eyed, Hardened in Oil and Tempered
Needles are made from good steel wire: cut, straightened, pointed, flattened and pierced for the eye, hardened by heating and plunging into oil, then tempered back to a springy hardness, scoured and polished (Bucknall Smith, A Treatise upon Wire, 1891). This is the same sequence by hand, one heavy needle at a time from piano wire; the hand methods and sizes are ours.
The picture: steel sewing needles (Wikimedia Commons).
ระดับกลาง
Half a day
คำแนะนำ
1
1
Cut, soften and straighten
Cut, soften and straighten
Cut 70 mm of 1.2 mm piano wire. Heat it to red in the forge and let it cool slowly in the ashes so it can be filed and drilled, then roll it straight on the anvil.
วัสดุสำหรับขั้นตอนนี้:
ลวดเปียโน70 mmเครื่องมือที่ต้องใช้:
คีมตัดลวดปากเฉียง
เตาตีเหล็กของช่างตีเหล็ก
คีมปากแหลมยาว
ทั่ง2
2
Point
Point
Clamp it in the vise and file a long, even taper to a sharp point, turning the wire as you go.
เครื่องมือที่ต้องใช้:
ชุดตะไบ
ปากกาจับชิ้นงานหน้าโต๊ะ
แว่นนิรภัย3
3
Flatten and pierce the eye
Flatten and pierce the eye
Flatten the head end slightly on the anvil, drill the eye through the flat with the finest bit, then file off the burrs and round the head.
เครื่องมือที่ต้องใช้:
ทั่ง
ค้อนหัวลิ่มขวาง
สว่านมือ
ชุดตะไบ
ปากกาจับชิ้นงานหน้าโต๊ะ
แว่นนิรภัย4
4
Harden in oil
Harden in oil
Heat the needle evenly to red and plunge it into the oil. It is now glass-hard and brittle.
เครื่องมือที่ต้องใช้:
เตาตีเหล็กของช่างตีเหล็ก
คีมปากแหลมยาว
บ่อชุบด้วยน้ำมัน
แว่นนิรภัย5
5
Temper
Temper
Reheat it in the oven to about 600 °F (315 °C) and let it cool slowly to a springy temper. If it came out crooked, straighten it with light blows of a small hammer on the anvil.
เครื่องมือที่ต้องใช้:
เตาอบชุบความร้อน
เทอร์โมคัปเปิลพร้อมจอแสดงผล
ทั่ง
ค้อนหัวลิ่มขวาง6
6
Scour and polish
Scour and polish
Scour it bright with emery cloth, a little oil and soap. Wash it in hot water, dry it in sawdust, touch up the point, and polish it on the leather strop.
เครื่องมือที่ต้องใช้:
ผ้าทรายอีเมอรี
น้ำมันมะกอก
สบู่
ขี้เลื่อย
สายหนังลับมีด
ชุดตะไบเครื่องมือที่จำเป็น
17- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้


